From: Patrick Delaunay Date: Wed, 27 Feb 2019 15:20:35 +0100 Subject: [U-Boot] [PATCH 4/7] tqma6s_wru4_mmc: manage board_spi_cs_gpio correctly In-Reply-To: <1551277238-604-1-git-send-email-patrick.delaunay@st.com> References: <1551277238-604-1-git-send-email-patrick.delaunay@st.com> Message-ID: <1551277238-604-5-git-send-email-patrick.delaunay@st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Define the function board_spi_cs_gpio only when needed, only called in drivers/spi/mxc_spi.c. That avoid compilation issue for tqma6s_wru4_mmc_defconfig when CONFIG_SF_DEFAULT_BUS and CONFIG_SF_DEFAULT_CS are not defined (CMD_SF not defined) after migration in KConfig. Signed-off-by: Patrick Delaunay --- board/tqc/tqma6/tqma6.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index 816672e..372a17c 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -155,11 +155,13 @@ __weak void tqma6_iomuxc_spi(void) ARRAY_SIZE(tqma6_ecspi1_pads)); } +#if defined(CONFIG_SF_DEFAULT_BUS) && defined(CONFIG_SF_DEFAULT_CS) int board_spi_cs_gpio(unsigned bus, unsigned cs) { return ((bus == CONFIG_SF_DEFAULT_BUS) && (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1; } +#endif static struct i2c_pads_info tqma6_i2c3_pads = { /* I2C3: on board LM75, M24C64, */ -- 2.7.4