From: John Garry Subject: [PATCH 1/6] scsi: hisi_sas: Change return variable type in phy_up_v3_hw() Date: Thu, 28 Feb 2019 22:50:57 +0800 Message-ID: <1551365462-128193-2-git-send-email-john.garry@huawei.com> References: <1551365462-128193-1-git-send-email-john.garry@huawei.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1551365462-128193-1-git-send-email-john.garry@huawei.com> Sender: linux-kernel-owner@vger.kernel.org To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com Cc: linuxarm@huawei.com, linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org, Xiang Chen , John Garry List-Id: linux-scsi@vger.kernel.org From: Xiang Chen According to the tool fortify, phy_up_v3_hw() returns signed value, while it should return an unsigned value. So change variable "res" from int to irq_return_t. Signed-off-by: Xiang Chen Signed-off-by: John Garry --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 00738d0673fe..151a102c4cc7 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -1344,7 +1344,8 @@ static void prep_abort_v3_hw(struct hisi_hba *hisi_hba, static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba) { - int i, res; + int i; + irqreturn_t res; u32 context, port_id, link_rate; struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; struct asd_sas_phy *sas_phy = &phy->sas_phy; -- 2.17.1