Return-Path: Authentication-Results: lists.ozlabs.org; spf=pass (mailfrom) smtp.mailfrom=linux.ibm.com (client-ip=148.163.156.1; helo=mx0a-001b2d01.pphosted.com; envelope-from=anoo@linux.ibm.com; receiver=) Authentication-Results: lists.ozlabs.org; dmarc=none (p=none dis=none) header.from=linux.ibm.com Received: from mx0a-001b2d01.pphosted.com (mx0a-001b2d01.pphosted.com [148.163.156.1]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 44DTxr3NWMzDqCX for ; Wed, 6 Mar 2019 08:07:59 +1100 (AEDT) Received: from pps.filterd (m0098399.ppops.net [127.0.0.1]) by mx0a-001b2d01.pphosted.com (8.16.0.27/8.16.0.27) with SMTP id x25L59EQ080941 for ; Tue, 5 Mar 2019 16:07:55 -0500 Received: from e34.co.us.ibm.com (e34.co.us.ibm.com [32.97.110.152]) by mx0a-001b2d01.pphosted.com with ESMTP id 2r1x9a7p8k-1 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=NOT) for ; Tue, 05 Mar 2019 16:07:54 -0500 Received: from localhost by e34.co.us.ibm.com with IBM ESMTP SMTP Gateway: Authorized Use Only! Violators will be prosecuted for from ; Tue, 5 Mar 2019 21:07:53 -0000 Received: from b03cxnp08025.gho.boulder.ibm.com (9.17.130.17) by e34.co.us.ibm.com (192.168.1.134) with IBM ESMTP SMTP Gateway: Authorized Use Only! Violators will be prosecuted; (version=TLSv1/SSLv3 cipher=AES256-GCM-SHA384 bits=256/256) Tue, 5 Mar 2019 21:07:51 -0000 Received: from b03ledav005.gho.boulder.ibm.com (b03ledav005.gho.boulder.ibm.com [9.17.130.236]) by b03cxnp08025.gho.boulder.ibm.com (8.14.9/8.14.9/NCO v10.0) with ESMTP id x25L7nNL32374794 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK); Tue, 5 Mar 2019 21:07:50 GMT Received: from b03ledav005.gho.boulder.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id B5054BE051; Tue, 5 Mar 2019 21:07:49 +0000 (GMT) Received: from b03ledav005.gho.boulder.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 4F43FBE04F; Tue, 5 Mar 2019 21:07:49 +0000 (GMT) Received: from habcap11p1.aus.stglabs.ibm.com (unknown [9.41.164.53]) by b03ledav005.gho.boulder.ibm.com (Postfix) with ESMTP; Tue, 5 Mar 2019 21:07:49 +0000 (GMT) From: Adriana Kobylak To: joel@jms.id.au, mspinler@linux.ibm.com, msbarth@linux.ibm.com Cc: openbmc@lists.ozlabs.org, Adriana Kobylak Subject: [PATCH] ARM: dts: aspeed: Add Swift BMC machine Date: Tue, 5 Mar 2019 15:07:47 -0600 X-Mailer: git-send-email 2.7.4 X-TM-AS-GCONF: 00 x-cbid: 19030521-0016-0000-0000-0000098C5881 X-IBM-SpamModules-Scores: X-IBM-SpamModules-Versions: BY=3.00010710; HX=3.00000242; KW=3.00000007; PH=3.00000004; SC=3.00000281; SDB=6.01170122; UDB=6.00611515; IPR=6.00950755; MB=3.00025846; MTD=3.00000008; XFM=3.00000015; UTC=2019-03-05 21:07:52 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 19030521-0017-0000-0000-0000425B311F Message-Id: <1551820067-53510-1-git-send-email-anoo@linux.ibm.com> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:, , definitions=2019-03-05_10:, , signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 malwarescore=0 suspectscore=0 phishscore=0 bulkscore=0 spamscore=0 clxscore=1015 lowpriorityscore=0 mlxscore=0 impostorscore=0 mlxlogscore=999 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1810050000 definitions=main-1903050136 X-BeenThere: openbmc@lists.ozlabs.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Development list for OpenBMC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 05 Mar 2019 21:08:01 -0000 The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components. There's a pending TODO to create the flash layout for its 16GB NAND flash chip. Use the default 32MB NOR flash chip for this initial commit. Signed-off-by: Adriana Kobylak --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 702 +++++++++++++++++++++++++++++ 2 files changed, 703 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1a2db60..2e0011b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1204,6 +1204,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file mode 100644 index 0000000..27459b7 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include +#include + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 14 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 15 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +/* TODO Update flash layout for 16GB NAND */ +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mbox { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = ; + }; + + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@2 { + reg = <2>; + type = ; + }; + + gpio@3 { + reg = <3>; + type = ; + }; + + gpio@4 { + reg = <4>; + type = ; + }; + + gpio@5 { + reg = <5>; + type = ; + }; + + gpio@6 { + reg = <6>; + type = ; + }; + + gpio@7 { + reg = <7>; + type = ; + }; + + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + + gpio@14 { + reg = <14>; + type = ; + }; + + gpio@15 { + reg = <15>; + type = ; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20@20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = ; + }; + + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@2 { + reg = <2>; + type = ; + }; + + gpio@3 { + reg = <3>; + type = ; + }; + + gpio@4 { + reg = <4>; + type = ; + }; + + gpio@5 { + reg = <5>; + type = ; + }; + + gpio@6 { + reg = <6>; + type = ; + }; + + gpio@7 { + reg = <7>; + type = ; + }; + + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + + gpio@14 { + reg = <14>; + type = ; + }; + + gpio@15 { + reg = <15>; + type = ; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c10 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi" -- 1.8.3.1