From: John covici Subject: Re: rc2 stereo problem with via8233 Date: Thu, 27 Jun 2002 10:14:41 -0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <15643.7633.177373.448813@ccs.covici.com> References: <15642.10186.820516.331246@ccs.covici.com> Reply-To: covici@ccs.covici.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org OK, here is -xvv for that controller. 00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 30) Subsystem: VIA Technologies, Inc.: Unknown device 4511 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Hi, > > At Wed, 26 Jun 2002 16:44:58 -0400, > John covici wrote: > > > > Here is what I get from the lspci -- I don't think that the via8233 > > is multi-channel at all and I didn't see any controls to utilize such > > a thing in my asound.state file. > > in fact via8233 has capability to output up to 6 channels (and spdif), > although most of motherboards have only two output channels. > > the difference is only the implementation of the driver, so no change > will appear on /etc/asound.state. > the channels are configured dynamically according to the requested > channels of pcm. > > > > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio > > Controller (rev 30) > > > > I can send you the verbose version if that would help. > > > > yes, could you get more detailed info with -xvv and -nvv options? > > and, please recheck under which condition this happens, > whether with the stereo samples or with the mono samples, or > whatever. > > i can revert the codes only for certain chip models. > since via8233 has _only_ multi-channel playback mode, it must use > this. but other chip models have another mode, which was used by the > old driver. this can be enabled conditionally by checking the chip > revision number. > > > Takashi -- John Covici covici@ccs.covici.com ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/