From: Philipp Zabel Subject: Re: [PATCH 1/1] arm64: dts: imx8mq: Add mux controller to iomuxc_gpr Date: Thu, 22 Aug 2019 13:38:25 +0200 Message-ID: <1566473905.3653.10.camel@pengutronix.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Guido =?ISO-8859-1?Q?G=FCnther?= , Rob Herring , Mark Rutland , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Lucas Stach , Abel Vesa , Anson Huang , Carlo Caione , "Angus Ainslie (Purism)" , Andrey Smirnov , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Thu, 2019-08-22 at 13:10 +0200, Guido Günther wrote: > The only mux controls the MIPI DSI input selection. > > Signed-off-by: Guido Günther Reviewed-by: Philipp Zabel regards Philipp > --- > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi > index 4fdd60f2c51e..3f3594d9485c 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi > @@ -440,8 +440,15 @@ > }; > > iomuxc_gpr: syscon@30340000 { > - compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; > + compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", > + "syscon", "simple-mfd"; > reg = <0x30340000 0x10000>; > + > + mux: mux-controller { > + compatible = "mmio-mux"; > + #mux-control-cells = <1>; > + mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */ > + }; > }; > > ocotp: ocotp-ctrl@30350000 {