From: Amit Singh Tomar Date: Sat, 25 Jan 2020 17:52:48 +0530 Subject: [PATCH v3 06/21] actions:s700: add u-boot specific dts file In-Reply-To: <1579954983-11329-1-git-send-email-amittomer25@gmail.com> References: <1579954983-11329-1-git-send-email-amittomer25@gmail.com> Message-ID: <1579954983-11329-7-git-send-email-amittomer25@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Devices like uart and clk are needed to be enabled before relocation. this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc. Signed-off-by: Amit Singh Tomar --- Changes since v2: * Added License. Changes since v1: * This is newly added file that was *not* present in v1 and contains u-boot specific changes. --- arch/arm/dts/s700-u-boot.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 arch/arm/dts/s700-u-boot.dtsi diff --git a/arch/arm/dts/s700-u-boot.dtsi b/arch/arm/dts/s700-u-boot.dtsi new file mode 100644 index 0000000..a527ccc --- /dev/null +++ b/arch/arm/dts/s700-u-boot.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Amit Singh Tomar + */ + +/{ + soc { + u-boot,dm-pre-reloc; + }; +}; + +&uart3 { + u-boot,dm-pre-reloc; +}; + +&cmu { + u-boot,dm-pre-reloc; +}; -- 2.7.4