From: sunil at amarulasolutions.com Date: Sun, 14 Jun 2020 00:02:34 +0530 Subject: [Buildroot] [PATCH 4/4] configs/nanopc_t4: new defconfig In-Reply-To: <1592073154-13731-1-git-send-email-sunil@amarulasolutions.com> References: <1592073154-13731-1-git-send-email-sunil@amarulasolutions.com> Message-ID: <1592073154-13731-5-git-send-email-sunil@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net From: Suniel Mahesh A defconfig for the friendlyarm nanopc-t4 was added in c23895f06e0988319a1959764a402b57bc21ffaf, but then removed in 8efd4463f78fd68c85b45cc0da347dfb805abb7e because an ARM32 compiler was needed to build ATF, and this was not supported back then. Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced. Following new changes are introduced in comparision with the older changeset: - updated readme - GPT partition layout is being used - update defconfig to build ATF - bump u-boot to 2020.04 - bump linux to 5.4.46 Signed-off-by: Suniel Mahesh --- NOTE: - new patch --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/friendlyarm/nanopc-t4/extlinux.conf | 4 +++ board/friendlyarm/nanopc-t4/genimage.cfg | 39 +++++++++++++++++++++ board/friendlyarm/nanopc-t4/post-build.sh | 5 +++ board/friendlyarm/nanopc-t4/readme.txt | 45 +++++++++++++++++++++++++ configs/nanopc_t4_defconfig | 56 +++++++++++++++++++++++++++++++ 7 files changed, 152 insertions(+) create mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf create mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg create mode 100755 board/friendlyarm/nanopc-t4/post-build.sh create mode 100644 board/friendlyarm/nanopc-t4/readme.txt create mode 100644 configs/nanopc_t4_defconfig diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 4ff0b4b..a3b268d 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -225,6 +225,7 @@ mx53loco_defconfig: { extends: .defconfig } mx6cubox_defconfig: { extends: .defconfig } mx6sx_udoo_neo_defconfig: { extends: .defconfig } mx6udoo_defconfig: { extends: .defconfig } +nanopc_t4_defconfig: { extends: .defconfig } nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } nanopi_m4_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index 220bb34..4a1cab4 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2392,9 +2392,11 @@ F: package/powertop/ N: Suniel Mahesh F: board/firefly/ +F: board/friendlyarm/nanopc-t4 F: board/friendlyarm/nanopi-m4 F: board/orangepi/orangepi-rk3399 F: board/pine64/rockpro64 +F: configs/nanopc_t4_defconfig F: configs/nanopi_m4_defconfig F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig diff --git a/board/friendlyarm/nanopc-t4/extlinux.conf b/board/friendlyarm/nanopc-t4/extlinux.conf new file mode 100644 index 0000000..31c6b30 --- /dev/null +++ b/board/friendlyarm/nanopc-t4/extlinux.conf @@ -0,0 +1,4 @@ +label RK3399_NanoPC_T4 linux + kernel /Image + devicetree /rk3399-nanopc-t4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rootwait diff --git a/board/friendlyarm/nanopc-t4/genimage.cfg b/board/friendlyarm/nanopc-t4/genimage.cfg new file mode 100644 index 0000000..7508c7d --- /dev/null +++ b/board/friendlyarm/nanopc-t4/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-nanopc-t4.dtb", + "extlinux" + } + } + size = 112M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/friendlyarm/nanopc-t4/post-build.sh b/board/friendlyarm/nanopc-t4/post-build.sh new file mode 100755 index 0000000..ba29375 --- /dev/null +++ b/board/friendlyarm/nanopc-t4/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf diff --git a/board/friendlyarm/nanopc-t4/readme.txt b/board/friendlyarm/nanopc-t4/readme.txt new file mode 100644 index 0000000..6259c9e --- /dev/null +++ b/board/friendlyarm/nanopc-t4/readme.txt @@ -0,0 +1,45 @@ +FriendlyARM NANOPC-T4 +===================== + +Build: + + $ make nanopc_t4_defconfig + $ make + +Files created in output directory +================================= + +output/images + +????????? bl31.elf +????????? boot.vfat +????????? extlinux +????????? idbloader.img +????????? Image +????????? rk3399-nanopc-t4.dtb +????????? rootfs.ext2 +????????? rootfs.ext4 -> rootfs.ext2 +????????? rootfs.tar +????????? sdcard.img +????????? u-boot.bin +????????? u-boot.itb + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device + +Serial console +-------------- + +Baudrate for this board is 1500000 + +Login: +------ +Apply power and press the PWR button for 3 sec. Enter 'root' as login user, and the prompt is ready. + +https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/npc_t4.html diff --git a/configs/nanopc_t4_defconfig b/configs/nanopc_t4_defconfig new file mode 100644 index 0000000..a936f07 --- /dev/null +++ b/configs/nanopc_t4_defconfig @@ -0,0 +1,56 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopc-t4-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.46" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopc-t4" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="nanopc-t4" +BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPC-T4" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="96M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopc-t4/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopc-t4/post-build.sh" -- 2.7.4