From: Mingming Lee Date: Wed, 2 Sep 2020 09:26:02 +0800 Subject: [PATCH] pinctrl: mediatek: mt8512: fix the wrong start address of ranges In-Reply-To: <1596792723-26783-1-git-send-email-chunfeng.yun@mediatek.com> References: <1596792723-26783-1-git-send-email-chunfeng.yun@mediatek.com> Message-ID: <1599009962.12868.2.camel@mhfsdcap03> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, 2020-08-07 at 17:32 +0800, Chunfeng Yun wrote: > The start address of dout, pullen and pullsel ragnes are wrong, > so fix up them. > > Signed-off-by: Chunfeng Yun > --- > drivers/pinctrl/mediatek/pinctrl-mt8512.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8512.c b/drivers/pinctrl/mediatek/pinctrl-mt8512.c > index af43754..bf2a8dd9 100644 > --- a/drivers/pinctrl/mediatek/pinctrl-mt8512.c > +++ b/drivers/pinctrl/mediatek/pinctrl-mt8512.c > @@ -31,15 +31,15 @@ static const struct mtk_pin_field_calc mt8512_pin_di_range[] = { > }; > > static const struct mtk_pin_field_calc mt8512_pin_do_range[] = { > - PIN_FIELD(0, 115, 0x860, 0x10, 0, 1), > + PIN_FIELD(0, 115, 0x0A0, 0x10, 0, 1), > }; > > static const struct mtk_pin_field_calc mt8512_pin_pullen_range[] = { > - PIN_FIELD(0, 115, 0x900, 0x10, 0, 1), > + PIN_FIELD(0, 115, 0x860, 0x10, 0, 1), > }; > > static const struct mtk_pin_field_calc mt8512_pin_pullsel_range[] = { > - PIN_FIELD(0, 115, 0x0A0, 0x10, 0, 1), > + PIN_FIELD(0, 115, 0x900, 0x10, 0, 1), > }; > > static const struct mtk_pin_field_calc mt8512_pin_ies_range[] = { Reviewed-by: Mingming Lee