From: Rob Herring Date: Wed, 13 Jan 2021 09:45:04 -0600 Subject: [PATCH v2 1/4] dt-bindings: hwmon: Add Aspeed AST2600 PWM/Fan In-Reply-To: <20210113070850.1184506-2-troy_lee@aspeedtech.com> References: <20210113070850.1184506-1-troy_lee@aspeedtech.com> <20210113070850.1184506-2-troy_lee@aspeedtech.com> Message-ID: <1610552704.291941.2506185.nullmailer@robh.at.kernel.org> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On Wed, 13 Jan 2021 07:08:45 +0000, Troy Lee wrote: > We add binding for supporting a new AST2600 PWM/Fan hwmon driver. > > Changes since v1: > - dt binding with DT schema format > > Signed-off-by: Troy Lee > --- > .../hwmon/aspeed,ast2600-pwm-tachometer.yaml | 137 ++++++++++++++++++ > 1 file changed, 137 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,ast2600-pwm-tachometer.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/hwmon/aspeed,ast2600-pwm-tachometer.yaml:108:2: [warning] wrong indentation: expected 2 but found 1 (indentation) dtschema/dtc warnings/errors: See https://patchwork.ozlabs.org/patch/1425628 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.