From: Rob Herring Date: Mon, 21 Mar 2022 08:35:11 -0500 Subject: [PATCH v2 1/3] dt-bindings: net: add reset property for aspeed, ast2600-mdio binding In-Reply-To: <20220321095648.4760-2-dylan_hung@aspeedtech.com> References: <20220321095648.4760-1-dylan_hung@aspeedtech.com> <20220321095648.4760-2-dylan_hung@aspeedtech.com> Message-ID: <1647869711.893197.4125325.nullmailer@robh.at.kernel.org> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On Mon, 21 Mar 2022 17:56:46 +0800, Dylan Hung wrote: > The AST2600 MDIO bus controller has a reset control bit and must be > deasserted before the manipulating the MDIO controller. > > Signed-off-by: Dylan Hung > Cc: stable at vger.kernel.org > --- > .../devicetree/bindings/net/aspeed,ast2600-mdio.yaml | 4 ++++ > 1 file changed, 4 insertions(+) > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/1607671 mdio at 1e650000: 'resets' is a required property arch/arm/boot/dts/aspeed-ast2600-evb-a1.dt.yaml arch/arm/boot/dts/aspeed-ast2600-evb.dt.yaml arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dt.yaml mdio at 1e650008: 'resets' is a required property arch/arm/boot/dts/aspeed-ast2600-evb-a1.dt.yaml arch/arm/boot/dts/aspeed-ast2600-evb.dt.yaml arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dt.yaml arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dt.yaml mdio at 1e650010: 'resets' is a required property arch/arm/boot/dts/aspeed-ast2600-evb-a1.dt.yaml arch/arm/boot/dts/aspeed-ast2600-evb.dt.yaml mdio at 1e650018: 'resets' is a required property arch/arm/boot/dts/aspeed-ast2600-evb-a1.dt.yaml arch/arm/boot/dts/aspeed-ast2600-evb.dt.yaml arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dt.yaml