From: Alexandre GRIVEAUX Date: Tue, 15 Jan 2019 13:53:47 +0100 Subject: [U-Boot] Help/Clue to improve Z-turn board support Message-ID: <16641bddfeb877a94ca6727764e78322@deutnet.info> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de Hello, I tried to have mainline uboot for Z-turn board (patch sent in December,=20 wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board) Even with the right ps7_init_gpl.c : the board doesn't boot. I tried to correct zynq-zturn.dts [0] because I don't find MYIR=20 references in drivers from this line: compatible =3D "myir,zynq-zturn",=20 "xlnx,zynq-7000"; And the HEADER is not the same as the other boards: same result. Picking a board (microzed) with zturn DTS above and using=20 microzed_defconfig provide some good result to me (except for ethernet) According to the build messages between zturn and microzed, the make=20 command doesn't create this SPL files: spl/board/xilinx/zynq/.built-in.o.cmd spl/board/xilinx/zynq/built-in.o spl/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.o spl/board/xilinx/zynq/zynq-microzed/.ps7_init_gpl.o.cmd spl/u-boot-spl I don=E2=80=99t have a clue how to resolv that. Do you have any idea ? Thanks [0] Exemple taken from=20 https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf