From: shami Allam Date: Thu, 20 Dec 2007 11:52:43 +0000 (GMT) Subject: [U-Boot-Users] 4xx ethernet bringup In-Reply-To: <200712192021.50228.sr@denx.de> Message-ID: <169884.69719.qm@web94113.mail.in2.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefan, I assigned the ethaddr as 192.168.13.246 and after that i run the command "saveenv " and reset the board. I got the following Net: ppc_4xx_eth0. once i get the shell prompt i assign the ipaddr as 192.168.13.241 and after that i run the command "saveenv" and reset the board. Now i tried to ping my Host PC which has the IP address as 192.168.13.240, i am getting the following error.....I am not able to ping the host IP. Can you please show some way to come of this issue..... => ping 192.168.13.240 Trying ppc_4xx_eth0 PHY speed read failed, assuming 10bT PHY duplex read failed, assuming half duplex ENET Speed is 10 Mbps - HALF duplex connection Using ppc_4xx_eth0 device sending ARP for c0a80df0 ARP broadcast 1 ARP broadcast 2 ping failed; host 192.168.13.240 is not alive => Regards, Shami... Stefan Roese wrote: On Wednesday 19 December 2007, shami Allam wrote: > I am working on the 405GP custome board. I am able to bringup the > SDRAM,Flash,I2c and serail on the board. But while trying to bringup the > ethernet i am getting the following error. "No Ethernet found". On my board > there is "DP83848I" PHY chip. This message gets printed when you don't define the "ethaddr" environement address. So set this variable to a valid value and save the environment and reset the board. Then you should see one eth-interface. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de ===================================================================== --------------------------------- Get the freedom to save as many mails as you wish. Click here to know how. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20071220/dc27ad89/attachment.htm