From: Daniel Schwierzeck Date: Wed, 13 May 2020 15:10:25 +0200 Subject: [PATCH v1 04/10] mips: traps: Set WG bit in EBase register on Octeon In-Reply-To: <20200502085944.13444-5-sr@denx.de> References: <20200502085944.13444-1-sr@denx.de> <20200502085944.13444-5-sr@denx.de> Message-ID: <1767e784-3353-39a3-cb3d-c2b391d0ee5f@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 02.05.20 um 10:59 schrieb Stefan Roese: > WG (bit 11) needs to be set on Octeon to enable writing bits 63:30 of > the exception base register. > > Signed-off-by: Stefan Roese > --- > > arch/mips/lib/traps.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/mips/lib/traps.c b/arch/mips/lib/traps.c > index 8fff7541e3..ccbce97161 100644 > --- a/arch/mips/lib/traps.c > +++ b/arch/mips/lib/traps.c > @@ -106,6 +106,10 @@ void trap_init(ulong reloc_addr) > > saved_ebase = read_c0_ebase() & 0xfffff000; > > + /* Set WG bit on Octeon to enable writing to bits 63:30 */ > + if (IS_ENABLED(CONFIG_ARCH_OCTEON)) > + ebase |= BIT(11); you should add something like this to mipsregs.h #define EBASE_WG (_ULCAST_(1) << 11) we already have EBASE_CPUNUM. > + > write_c0_ebase(ebase); > clear_c0_status(ST0_BEV); > execution_hazard_barrier(); > -- - Daniel