Return-Path: Received: by yocto-www.yoctoproject.org (Postfix, from userid 118) id 1076EE00C94; Thu, 10 Jan 2019 01:57:15 -0800 (PST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on yocto-www.yoctoproject.org X-Spam-Level: X-Spam-Status: No, score=-2.7 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HTML_MESSAGE,RCVD_IN_DNSWL_LOW autolearn=ham version=3.3.1 X-Spam-HAM-Report: * -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% * [score: 0.0000] * -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low * trust * [91.90.150.23 listed in list.dnswl.org] * 0.0 HTML_MESSAGE BODY: HTML included in message * -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's * domain * -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature * 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily * valid Received: from s2023.ppsmtp.net (s2023.ppsmtp.net [91.90.150.23]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id F3293E00C77 for ; Thu, 10 Jan 2019 01:57:09 -0800 (PST) Received: from pps.filterd (s2023.ppsmtp.net [127.0.0.1]) by s2023.ppsmtp.net (8.16.0.22/8.16.0.22) with SMTP id x0A9thQh019578 for ; Thu, 10 Jan 2019 10:57:08 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ifm.com; h=from : to : subject : date : message-id : references : in-reply-to : mime-version : content-type; s=pps; bh=Tg+n4q1f5Xq9mXzhFy6BB59PPMTx/6ENxigasPwasUc=; b=yyPiIwGji5Y8+NfQcjXFwG19C1NZTFHJvFxqQWuaZtMolYjYzOubYdeNr9tvd/p99OQd iy+PMC3n+Ltcix22kNgPbzFCVvwFFLDkLWAYenGmnSy71sBkozumeOTPSG7Hi3QbyK1T 1EQ4N6qSifV17QZh2dP8kHmMOQG5TScU/TI7NQjxJR66y8mZPk0ZcVHHHTBxfikCqyNB /dHGp7FFmbZZa+JjlMknommAyvcTt/dDnM1MX2+8B/Z+iTAAlbxgQjIWAFZ0GtKA1qog 6Ap1OaubqJ1W2Gx/gNRQuGMDxYJxRI+CuaO1iieXjvQ5s1wWOfgrzdVF1m/nIAGac9QW TA== Received: from deesdmz227.dmz.es.de.ifm (mail27.ifm.com [194.156.152.227]) by s2023.ppsmtp.net with ESMTP id 2ptkhctbd6-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO) for ; Thu, 10 Jan 2019 10:57:08 +0100 Received: from deesdmz227.dmz.es.de.ifm (localhost [127.0.0.1]) by deesdmz227.dmz.es.de.ifm (Postfix) with ESMTP id DE607884448 for ; Thu, 10 Jan 2019 10:57:07 +0100 (CET) From: "Pandey, Kamal" To: Jiaying Liang , "yocto@yoctoproject.org" Thread-Topic: bitbake openamp-image-minimal fails to create image Thread-Index: AdSmWDG603OeUfxeQYusuc4ZfFevdgACc8iwAA9BEDAABrMwsAB7TuiwAAJlgZA= Date: Thu, 10 Jan 2019 09:57:06 +0000 Message-ID: <1855fa3943cd4ad69d41f6ffc5600597@ifm.com> References: <4d5f7a22db584df89e7e9f5404f845d2@ifm.com> <6f9664b4422a45dea24977f17e529033@ifm.com> In-Reply-To: Accept-Language: de-DE, en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.29.169.147] X-TM-AS-Product-Ver: SMEX-12.5.0.1300-8.2.1013-24350.005 X-TM-AS-Result: No-16.493300-5.000000-10 X-TMASE-MatchedRID: 8HTFlOrbAtGnykMun0J1whlckvO1m+Jc1KoSW5Ji1XtZqVsofx0oehlb y9sTjxSitEVswsXx/BvkzzkniObw59w6ZBw9OLRPaK+MsTwM+1l+S5m2/8VLmkYvSDWdWaRhuwh qyc+q/JBRgIF6+/n5rJ9U8MkeLkK4fUZxHkB4SzslcqT+ugT9EA4lH/4ULmGFRWPWH51O/r6O57 e7SDv3mFsL5HBj8XzSjufvcQiGaTatx3S0fXol8XV7tdtvoibaB0I+iCUO4521FeFXyekgdENFJ C6C2PHmNGY7Cgrpy+5zdyf1FJX2z8M8uuVxUoOD/c0+LJTMrN1A8I/PJy4EUzkIJSQdQ27uJMJX DJjkqdQl6eA+5N2cxzC0BN08vDkf6KhkLBjPN7AYUxiUNTPCveHCwRwMNQUWQAC1c3lmEHC2DQN 5h1Hbt/h2ZcJofSWjDIT4o38Lw+zz50g+jp9gnkhwlOfYeSqx1kqyrcMalqX1gF7PCEF9bqwdd1 4j6nTyht62uSu+RtjwC+yY/IpROILS3/JFc6VRkRs1fAcYNHHxAJQLHjrob0Yx760ONDcWjbCTE HGuNi7xgEJSHl0g+UtOa+Yevc9i5WtJ4+HrVDnvVbHa5Rs8t0OvwxWboMrdu/zUE1SNSPmM0vGt zEpWJYyRWx0wlnUGf6WytOayZdvWV8MKb34RlVgowyUWHgGdh+w9Wz/xXDoR8rMICe0qkPMxs+u cp3ZM7gzcfk5O5gtiXQjTxUn166dwsJe6fN2LuIwLnB3Aqp34uJ1REX4MHbXvDHySC+eUhzNUKu 2Ue5r+f0nlDYjAjtACeWZ6/YSZIg67HHizFeGeAiCmPx4NwMidYBYDjITp/7qwaZzjjp+jPxW4T OhT9gwWxr7XDKH8lscx3GmApoCsiBFDXP/Mwmyzh4zlkibIq/WvXvcC04Ut20vkjVbv8A== X-TM-AS-User-Approved-Sender: Yes X-TM-AS-User-Blocked-Sender: No X-TMASE-Result: 10--16.493300-5.000000 X-TMASE-Version: SMEX-12.5.0.1300-8.2.1013-24350.005 X-TM-SNTS-SMTP: C7BB3D73F339A375219979E5AE36407FAD95DA904DE5F35DA5326EE670EE9E882002:9 x-c2processedorg: 02c94ccb-b9eb-40fe-af38-4bcaa8aaafa4 MIME-Version: 1.0 X-CompuMailGateway: Version: 7.00.0.19367.x86_64 COMPUMAIL Date: 20190110095707Z X-Proofpoint-ID: SID=2ptkhctbd6 QID=2ptkhctbd6-1 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:, , definitions=2019-01-10_04:, , signatures=0 Subject: Re: bitbake openamp-image-minimal fails to create image X-BeenThere: yocto@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Discussion of all things Yocto Project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 Jan 2019 09:57:15 -0000 Content-Language: en-US Content-Type: multipart/alternative; boundary="_000_1855fa3943cd4ad69d41f6ffc5600597ifmcom_" --_000_1855fa3943cd4ad69d41f6ffc5600597ifmcom_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi wendy, Thanks for replying. I have already enabled remoteproc, rpmsg and virtio in= the kernel configuration. I have also added CORE_IMAGE_EXTRA_INSTALL +=3D " \ kernel-modules \ " In my local.conf file. I generated BOOT.bin file from bootgen.bif file after adding the rpu firmwa= re: [destination_cpu=3Dr5-0] While booting the device I didn't see r5 code being booted. Now I am trying Building Linux Applications Using OpenAMP RPMsg in Linux Us= erspace Using meta-openamp layer. I found that there is a patch "Add Xilinx ZynqMP R5 remoteproc driver.patch= " to have a53 and r5 communication. Is this patch required for the purpose= of openamp in userspace? This patch was missing in meta-xilinx and I brought it to my custom layer, = but it failed to apply giving the following error: error: include/linux/firmware/xlnx-zynqmp.h: does not exist in index | error: include/linux/firmware/xlnx-zynqmp.h: does not exist in index | error: include/linux/firmware/xlnx-zynqmp.h: does not exist in index | error: drivers/firmware/xilinx/zynqmp.c: does not exist in index | error: include/linux/firmware/xlnx-zynqmp.h: does not exist in index | error: drivers/firmware/xilinx/zynqmp.c: does not exist in index | error: include/linux/firmware/xlnx-zynqmp.h: does not exist in index | [ERROR]: Application of .kernel-meta//patches//./0276-Add-Xilinx-ZynqMP-R= 5-remoteproc-driver.patch failed. | Patch needs to be refreshed. Sample resolution script: | .git/rebase-apply/resolve_rejects | ERROR: Could not apply patches for pdm3-rev-b-zynqmp. | ERROR: Patch failures can be resolved in the linux source directory /medi= a/iepl/iepl1/work/yocto_build/build_openamp/tmp/work-shared/pdm3-rev-b-zynq= mp/kernel-source) | WARNING: /media/iepl/iepl1/work/yocto_build/build_openamp/tmp/work/pdm3_r= ev_b_zynqmp-pdm3-linux/linux-yocto/4.14.79+gitAUTOINC+f1d93b219b-r0/temp/ru= n.do_patch.17384:1 exit 1 from 'exit 1' | ERROR: Function failed: do_patch (log file is located at /media/iepl/iepl= 1/work/yocto_build/build_openamp/tmp/work/pdm3_rev_b_zynqmp-pdm3-linux/linu= x-yocto/4.14.79+gitAUTOINC+f1d93b219b-r0/temp/log.do_patch.17384) Now the Xilinx document UG1186 never mentioned about this patch or driver. = Also is this patch for the kernelspace implementation or userspace implemen= tation. And I am using tftp boot. I think that if r5 was able to boot it should sho= w me while booting as I am serially connected to the device. Please provide any pointers on this. Has anyone implemented this using meta= -openamp layer and no petalinux. Thanks From: Jiaying Liang Sent: 10 January 2019 11:14 To: Manjukumar Harthikote Matha ; Pandey, Kamal ; yocto@yoctoproject.org; meta-xilinx@yoctoproject.org Subject: RE: bitbake openamp-image-minimal fails to create image From: yocto-bounces@yoctoproject.org= [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Manjukumar Harthikote= Matha Sent: Monday, January 07, 2019 10:51 AM To: Pandey, Kamal >; yoct= o@yoctoproject.org; meta-xilinx@yoctoproject= .org Subject: Re: [yocto] bitbake openamp-image-minimal fails to create image +meta-xilinx mailing list From: Pandey, Kamal [mailto:Kamal.Pandey@ifm.com] Sent: Monday, January 07, 2019 8:59 AM To: yocto@yoctoproject.org; Manjukumar Harth= ikote Matha > Subject: RE: bitbake openamp-image-minimal fails to create image Hi, I solved the problem by using meta-openamp(branch should be similar to xili= nx version) layer in my yocto project and enabled "libmetal" and "open-amp"= packages in my image recipe. It compiled successfully. I also add rpmsg-e= cho-test, rpmsg-mat-mul , and rpmsg-proxy-app packages in the image and it= successfully compiled. I am building Linux Application that uses RPMsg in = user space. Now the executable generated from echo-test or mat-mul are in my host linux= master (a53-core). I have also created an r5-application using XSDK. What is the next step to have a communication between a53 and r5. How to us= e the generated elf file for r5 processor. Also I have enabled remoteproc, rpmsg, virtio in kernel configuration. But while using the command " $modprobe zynqmp_r5_remoteproc", I get the fo= llowing error: "modprobe: module zynqmp_r5_remoteproc not found in modules.dep" [Wendy] It doesn't look like the zynqmp_r5_remoteproc driver is compiled or= maybe it is compiled but not add into the system. Please check the following: * If your linux kernel has enabled in your kernel .config * If you have "kernel-modules" added to your image o E.g.: o CORE_IMAGE_EXTRA_INSTALL +=3D " \ o kernel-modules \ o " Best Regards, Wendy How can I boot the r5 processor and where to store the elf file generated. From: Manjukumar Harthikote Matha > Sent: 07 January 2019 13:53 To: Pandey, Kamal >; yoct= o@yoctoproject.org Subject: RE: bitbake openamp-image-minimal fails to create image Hi Kamal, Seems like the required kernel modules are missing causing the breakage. Enable them using kernel menuconfig (bitbake virtual/kernel -c menuconfig) = and then build the image Thanks, Manju From: yocto-bounces@yoctoproject.org= [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Pandey, Kamal Sent: Sunday, January 06, 2019 11:14 PM To: yocto@yoctoproject.org Subject: [yocto] bitbake openamp-image-minimal fails to create image Hello, I used the meta-openamp layer for r5-a53 communication. but when I simply ran $bitbake openamp-image-minimal, it gave me the follow= ing error: ERROR: openamp-image-minimal-1.0-r0 do_rootfs: Could not invoke dnf. Comman= d '/media/iepl/iepl1/work/yocto_build/build-open-amp/tmp/work/pdm3_rev_b_zy= nqmp-pdm3-linux/openamp-image-minimal/1.0-r0/recipe-sysroot-native/usr/bin/= dnf -y -c /media/iepl/iepl1/work/yocto_build/build-open-amp/tmp/work/pdm3_r= ev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/rootfs/etc/dnf/dnf.conf= --setopt=3Dreposdir=3D/media/iepl/iepl1/work/yocto_build/build-open-amp/tm= p/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/rootfs/etc= /yum.repos.d --repofrompath=3Doe-repo,/media/iepl/iepl1/work/yocto_build/bu= ild-open-amp/tmp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.= 0-r0/oe-rootfs-repo --installroot=3D/media/iepl/iepl1/work/yocto_build/buil= d-open-amp/tmp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-= r0/rootfs --setopt=3Dlogdir=3D/media/iepl/iepl1/work/yocto_build/build-open= -amp/tmp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/tem= p --nogpgcheck install kernel-module-virtio-ring kernel-module-virtio-rpmsg= -bus kernel-module-uio-pdrv-genirq kernel-module-virtio libopen-amp0 packag= egroup-base-extended kernel-image-fitimage-4.14.79-yocto-standard run-posti= nsts libmetal packagegroup-core-boot kernel-module-remoteproc' returned 1: Added oe-repo repo from /media/iepl/iepl1/work/yocto_build/build-open-amp/t= mp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/oe-rootfs= -repo Last metadata expiration check: 0:00:00 ago on Fri 04 Jan 2019 01:58:31 PM = UTC. No package kernel-module-virtio-ring available. No package available. No package kernel-module-virtio available. No package available. Error: Unable to find a match ERROR: openamp-image-minimal-1.0-r0 do_rootfs: Function failed: do_rootfs ERROR: Logfile of failure stored in: /media/iepl/iepl1/work/yocto_build/bui= ld-open-amp/tmp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0= -r0/temp/log.do_rootfs.7153 ERROR: Task (/home/iepl/work/yocto_build/poky/../meta-openamp/recipes-opena= mp/images/openamp-image-minimal.bb:do_rootfs) failed with exit code '1' Can someone provide me a solution to this problem. Thanks --_000_1855fa3943cd4ad69d41f6ffc5600597ifmcom_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Hi wendy,

Thanks for replying. I have already enabled remoteproc, rpmsg and virt= io in the kernel configuration.

I have also added

CORE_IMAGE_EXTRA_INSTALL +=3D " \

<= span style=3D"color:#1F497D;mso-fareast-language:EN-US">kernel-modules \

<= span style=3D"color:#1F497D;mso-fareast-language:EN-US">“<= /span>

In my local.conf file.

I generated BOOT.bin file from bootgen.bif file after adding the rpu f= irmware:

[destination_cpu=3Dr5-0] <path to RPU firmware>

While booting the device I didn’t see r5 code being booted.=

Now I am trying Building Linux Applications Using OpenAMP RPMsg in Lin= ux Userspace

Using meta-openamp layer.

I found that there is a patch “Add Xilinx ZynqMP R5 remoteproc driver.patch”  to = have a53 and r5 communication. Is this patch required for the purpose of&nb= sp; openamp in userspace?

This patch was missing in meta-xilinx and I brought it to my custom la= yer, but it failed to apply giving the following error:

 

error: include/linux/firmware/xlnx-zynqmp.h: does not exist in inde= x

| error: include/linux/firmware/xlnx-zynqmp.h: does not exist in in= dex

| error: include/linux/firmware/xlnx-zynqmp.h: does not exist in in= dex

| error: drivers/firmware/xilinx/zynqmp.c: does not exist in index<= o:p>

| error: include/linux/firmware/xlnx-zynqmp.h: does not exist in in= dex

| error: drivers/firmware/xilinx/zynqmp.c: does not exist in index<= o:p>

| error: include/linux/firmware/xlnx-zynqmp.h: does not exist in in= dex

| [ERROR]: Application of .kernel-meta//patches//./0276-Add-Xilinx-= ZynqMP-R5-remoteproc-driver.patch failed.

|          Patch needs= to be refreshed. Sample resolution script:

|           =    .git/rebase-apply/resolve_rejects

| ERROR: Could not apply patches for pdm3-rev-b-zynqmp.<= /span>

| ERROR: Patch failures can be resolved in the linux source directo= ry /media/iepl/iepl1/work/yocto_build/build_openamp/tmp/work-shared/pdm3-re= v-b-zynqmp/kernel-source)

| WARNING: /media/iepl/iepl1/work/yocto_build/build_openamp/tmp/wor= k/pdm3_rev_b_zynqmp-pdm3-linux/linux-yocto/4.14.79+gitAUTOINC+f1d93= b219b-r0/temp/run.do_patch.17384:1 exit 1 from 'exit 1'

| ERROR: Function failed: do_patch (log file is located at /media/i= epl/iepl1/work/yocto_build/build_openamp/tmp/work/pdm3_rev_b_zynqmp-pdm3-li= nux/linux-yocto/4.14.79+gitAUTOINC+f1d93b219b-r0/temp/log.do_patch.= 17384)

 

Now the Xilinx document UG1186 never mentioned about this patch or dri= ver. Also is this patch for the kernelspace implementation or userspace imp= lementation.

And I am using tftp boot. I think that if r5 was able to boot it shoul= d show me while booting as I am serially connected to the device.

Please provide any pointers on this. Has anyone implemented this using= meta-openamp layer and no petalinux.

Thanks

From: Jiaying Liang <jliang@xilinx.com>
Sent: 10 January 2019 11:14
To: Manjukumar Harthikote Matha <MANJUKUM@xilinx.com>; Pandey,= Kamal <Kamal.Pandey@ifm.com>; yocto@yoctoproject.org; meta-xilinx@yo= ctoproject.org
Subject: RE: bitbake openamp-image-minimal fails to create image

 

&n= bsp;

&n= bsp;

From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Manjukumar Harthikote Matha
Sent: Monday, January 07, 2019 10:51 AM
To: Pandey, Kamal <Kamal.= Pandey@ifm.com>; yocto@yoctoproject.org; meta-xilinx@yoctoproject.org
Subject: Re: [yocto] bitbake openamp-image-minimal fails to create i= mage

 

+me= ta-xilinx mailing list

&n= bsp;

From: Pandey, Kamal [mailto:K= amal.Pandey@ifm.com]
Sent: Monday, January 07, 2019 8:59 AM
To: yocto@yoctoproject.org= ; Manjukumar Harthikote Matha <MANJUKUM@xilinx.com>
Subject: RE: bitbake openamp-image-minimal fails to create image

 

Hi, =

I solved the problem b= y using meta-openamp(branch should be similar to xilinx version) layer in m= y yocto project and enabled “libmetal” and “open-amp̶= 1; packages in my image recipe. It compiled successfully.  I also add rpmsg-echo-test,  rpmsg-mat-mul , and rpmsg-proxy-app packag= es in the image and it successfully compiled. I am building Linux Applicati= on that uses RPMsg in user space.

Now the executable gen= erated from echo-test or mat-mul are in my host linux master (a53-core). I = have also created an r5-application using XSDK.

What is the next step = to have a communication between a53 and r5. How to use the generated elf fi= le for r5 processor.

Also I have enabled re= moteproc, rpmsg, virtio  in kernel configuration.

But while using the co= mmand “ $modprobe zynqmp_r5_remoteproc”, I get the following error:<= /o:p>

 

“modprobe: mo= dule zynqmp_r5_remoteproc not found in modules.dep”

[Wendy] It doesn= ’t look like the zynqmp_r5_remoteproc driver is compiled or maybe it = is compiled but not add into the system.

 

Please check the= following:

·         If your linux = kernel has enabled in your kernel .config

·         If you have &#= 8220;kernel-modules” added to your image

o   E.g.:

o   CORE_IMAGE_EXT= RA_INSTALL +=3D " \

o     &n= bsp; kernel-modules \

o   “

Best Regards,

Wendy=

How can I boot the r5 = processor and where to store the elf file generated.

From: Manjukumar Harthikote Matha <MANJUKUM@xilinx.com>
Sent: 07 January 2019 13:53
To: Pandey, Kamal <Kamal.= Pandey@ifm.com>; yocto@yoctoproject.org
Subject: RE: bitbake openamp-image-minimal fails to create image

 

Hi Kama= l,

&n= bsp;

Seems l= ike the required kernel modules are missing causing the breakage.

Enable = them using kernel menuconfig (bitbake virtual/kernel –c menuconfig) a= nd then build the image

&n= bsp;

Thanks,=

Manju

&n= bsp;

From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Pandey, Kamal
Sent: Sunday, January 06, 2019 11:14 PM
To: yocto@yoctoproject.org=
Subject: [yocto] bitbake openamp-image-minimal fails to create image=

 

Hello,

I used the meta-opena= mp layer for r5-a53 communication.
but when I simply ran
<= span style=3D"font-size:9.0pt;font-family:Consolas;color:#24292E"> $bi= tbake openamp-image-minimal, it gave me the following error:

 

ERROR: openamp-image-minimal-1.0-r0 do_rootfs: Could not invoke d= nf. Command '/media/iepl/iepl1/work/yocto_build/build-open-amp/tmp/work/pdm= 3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/recipe-sysroot-nativ= e/usr/bin/dnf -y -c /media/iepl/iepl1/work/yocto_build/build-open-amp/tmp/work/pdm3_rev_= b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/rootfs/etc/dnf/dnf.conf --= setopt=3Dreposdir=3D/media/iepl/iepl1/work/yocto_build/build-open-amp/tmp/w= ork/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/rootfs/etc/yu= m.repos.d --repofrompath=3Doe-repo,/media/iepl/iepl1/work/yocto_build/build-open-amp= /tmp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/oe-root= fs-repo --installroot=3D/media/iepl/iepl1/work/yocto_build/build-open-amp/t= mp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/rootfs --setopt=3Dlogdir=3D/media/iepl/iepl1/work/yocto_build/build-open-amp/tmp/= work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0/temp --nogpg= check install kernel-module-virtio-ring kernel-module-virtio-rpmsg-bus kern= el-module-uio-pdrv-genirq kernel-module-virtio libopen-amp0 packagegroup-base-extended kernel-image-fitimage-4.14.79-yoct= o-standard run-postinsts libmetal packagegroup-core-boot kernel-module-remo= teproc' returned 1:

Added oe-repo repo from /media/iepl/iepl1/work/yocto_build/build-= open-amp/tmp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-minimal/1.0-r0= /oe-rootfs-repo

Last metadata expiration check: 0:00:00 ago on Fri 04 Jan 2019 01= :58:31 PM UTC.

No package kernel-module-virtio-ring available.=

No package   available.

No package kernel-module-virtio available.

No package   available.

Error: Unable to find a match

 

ERROR: openamp-image-minimal-1.0-r0 do_rootfs: Function failed: d= o_rootfs

ERROR: Logfile of failure stored in: /media/iepl/iepl1/work/yocto= _build/build-open-amp/tmp/work/pdm3_rev_b_zynqmp-pdm3-linux/openamp-image-m= inimal/1.0-r0/temp/log.do_rootfs.7153

ERROR: Task (/home/iepl/work/yocto_build/poky/../meta-openamp/rec= ipes-openamp/images/openamp-image-minimal.bb:do_rootfs) failed with exit code '1'

 

Can someone provide me a soluti= on to this problem.
Thanks

--_000_1855fa3943cd4ad69d41f6ffc5600597ifmcom_--