From: Sean Anderson Date: Tue, 4 Feb 2020 09:26:16 -0500 Subject: [PATCH v3 12/12] riscv: Add initial Sipeed Maix support In-Reply-To: References: <2c4c15f1-a096-233d-afcd-968dcaf36af6@gmail.com> Message-ID: <18709ca2-d73b-7746-7f7b-00c0b8f1fcd3@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 2/4/20 6:38 AM, Bin Meng wrote: > Hi Sean, > > On Mon, Feb 3, 2020 at 4:11 AM Sean Anderson wrote: >> >> The Sipeed Maix series is a collection of boards built around the RISC-V >> Kendryte K210 processor. This processor contains several peripherals to >> accelerate neural network processing and other "ai" tasks. This includes a "KPU" >> neural network processor, an audio processor supporting beamforming reception, >> and a digital video port supporting capture and output at VGA resolution. Other >> peripherals include 8M of sram (accessible with and without caching); >> remappable pins, including 40 GPIOs; AES, FFT, and SHA256 accelerators; a DMA >> controller; and I2C, I2S, and SPI controllers. Maix peripherals vary, but >> include spi flash; on-board usb-serial bridges; ports for cameras, displays, and >> sd cards; and ESP32 chips. Currently, only the Sipeed Maix Bit V2.0 (bitm) is >> supported, but the boards are fairly similar. >> >> Documentation for Maix boards is located at . >> Documentation for the Kendryte K210 is located at >> . However, hardware details are rather lacking, >> so most technical reference has been taken from the standalone sdk located at >> . >> >> Signed-off-by: Sean Anderson >> --- >> Changes for v3: >> - Reorder to be last in the patch series >> - Add documentation for the board >> - Generate defconfig with "make savedefconfig" >> - Update Kconfig to imply most features we need >> - Update MAINTAINERS >> Changes for v2: >> - Select CONFIG_SYS_RISCV_NOCOUNTER >> - Imply CONFIG_CLK_K210 >> - Remove spurious references to CONFIG_ARCH_K210 >> - Remove many configs from defconfig where the defaults were fine >> - Add a few "not set" lines to suppress unneeded defaults >> - Reduce pre-reloc malloc space, now that clocks initialization happens later >> >> arch/riscv/Kconfig | 4 +++ >> board/sipeed/maix/Kconfig | 51 ++++++++++++++++++++++++++++++ >> board/sipeed/maix/MAINTAINERS | 10 ++++++ >> board/sipeed/maix/Makefile | 5 +++ >> board/sipeed/maix/maix.c | 9 ++++++ >> configs/sipeed_maix_bitm_defconfig | 10 ++++++ >> doc/board/index.rst | 1 + >> doc/board/kendryte/index.rst | 9 ++++++ >> doc/board/kendryte/k210.rst | 46 +++++++++++++++++++++++++++ >> include/configs/sipeed-maix.h | 19 +++++++++++ >> 10 files changed, 164 insertions(+) >> create mode 100644 board/sipeed/maix/Kconfig >> create mode 100644 board/sipeed/maix/MAINTAINERS >> create mode 100644 board/sipeed/maix/Makefile >> create mode 100644 board/sipeed/maix/maix.c >> create mode 100644 configs/sipeed_maix_bitm_defconfig >> create mode 100644 doc/board/kendryte/index.rst >> create mode 100644 doc/board/kendryte/k210.rst >> create mode 100644 include/configs/sipeed-maix.h >> >> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig >> index 87c40f6c4c..81ab35dd2d 100644 >> --- a/arch/riscv/Kconfig >> +++ b/arch/riscv/Kconfig >> @@ -20,6 +20,9 @@ config TARGET_QEMU_VIRT >> config TARGET_SIFIVE_FU540 >> bool "Support SiFive FU540 Board" >> >> +config TARGET_SIPEED_MAIX >> + bool "Support Sipeed Maix Board" >> + >> endchoice >> >> config SYS_ICACHE_OFF >> @@ -53,6 +56,7 @@ source "board/AndesTech/ax25-ae350/Kconfig" >> source "board/emulation/qemu-riscv/Kconfig" >> source "board/microchip/mpfs_icicle/Kconfig" >> source "board/sifive/fu540/Kconfig" >> +source "board/sipeed/maix/Kconfig" >> >> # platform-specific options below >> source "arch/riscv/cpu/ax25/Kconfig" >> diff --git a/board/sipeed/maix/Kconfig b/board/sipeed/maix/Kconfig >> new file mode 100644 >> index 0000000000..b23d2448d9 >> --- /dev/null >> +++ b/board/sipeed/maix/Kconfig >> @@ -0,0 +1,51 @@ >> +# SPDX-License-Identifier: GPL-2.0+ >> +# Copyright (C) 2019 Sean Anderson >> + >> +if TARGET_SIPEED_MAIX >> + >> +config SYS_BOARD >> + default "maix" >> + >> +config SYS_VENDOR >> + default "sipeed" >> + >> +config SYS_CPU >> + default "generic" >> + >> +config SYS_CONFIG_NAME >> + default "sipeed-maix" >> + >> +config SYS_TEXT_BASE >> + default 0x80000000 >> + >> +config DEFAULT_DEVICE_TREE >> + default "k210-maix-bit" >> + >> +config NR_CPUS >> + default 2 >> + >> +config NR_DRAM_BANKS >> + default 2 >> + >> +config BOARD_SPECIFIC_OPTIONS >> + def_bool y >> + select GENERIC_RISCV >> + select RISCV_PRIV_1_9_1 >> + imply DM_SERIAL >> + imply SIFIVE_SERIAL >> + imply SIFIVE_CLINT >> + imply CLK_CCF >> + imply CLK_COMPOSITE_CCF >> + imply CLK_K210 >> + imply DM_RESET >> + imply RESET_SYSCON >> + imply SYSRESET >> + imply SYSRESET_SYSCON >> + imply SPI >> + imply DESIGNWARE_SPI >> + imply SPI_FLASH_GIGADEVICE >> + imply MMC >> + imply MMC_SPI >> + imply MMC_BROKEN_CD >> + imply CMD_MMC >> +endif >> diff --git a/board/sipeed/maix/MAINTAINERS b/board/sipeed/maix/MAINTAINERS >> new file mode 100644 >> index 0000000000..43cf61fb64 >> --- /dev/null >> +++ b/board/sipeed/maix/MAINTAINERS >> @@ -0,0 +1,10 @@ >> +Sipeed Maix BOARD >> +M: Sean Anderson >> +S: Maintained >> +F: arch/riscv/dts/k210.dtsi >> +F: arch/riscv/dts/k210-maix-bit.dts >> +F: board/sipeed/maix/ >> +F: configs/sipeed_maix_defconfig >> +F: drivers/clk/kendryte/ >> +F: include/configs/sipeed-maix.h >> +F: include/dt-bindings/*/k210-sysctl.h >> diff --git a/board/sipeed/maix/Makefile b/board/sipeed/maix/Makefile >> new file mode 100644 >> index 0000000000..4acff5b31e >> --- /dev/null >> +++ b/board/sipeed/maix/Makefile >> @@ -0,0 +1,5 @@ >> +# SPDX-License-Identifier: GPL-2.0+ >> +# >> +# Copyright (c) 2019 Western Digital Corporation or its affiliates. >> + >> +obj-y += maix.o >> diff --git a/board/sipeed/maix/maix.c b/board/sipeed/maix/maix.c >> new file mode 100644 >> index 0000000000..f8e773acf7 >> --- /dev/null >> +++ b/board/sipeed/maix/maix.c >> @@ -0,0 +1,9 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Copyright (C) 2019 Sean Anderson >> + */ >> + >> +int board_init(void) >> +{ >> + return 0; >> +} >> diff --git a/configs/sipeed_maix_bitm_defconfig b/configs/sipeed_maix_bitm_defconfig >> new file mode 100644 >> index 0000000000..22d814ec7f >> --- /dev/null >> +++ b/configs/sipeed_maix_bitm_defconfig >> @@ -0,0 +1,10 @@ >> +CONFIG_RISCV=y >> +CONFIG_TARGET_SIPEED_MAIX=y >> +CONFIG_ARCH_RV64I=y >> +# CONFIG_LEGACY_IMAGE_FORMAT is not set >> +# CONFIG_AUTOBOOT is not set >> +# CONFIG_NET is not set >> +# CONFIG_INPUT is not set >> +# CONFIG_MTD is not set >> +# CONFIG_DM_ETH is not set >> +# CONFIG_EFI_LOADER is not set >> diff --git a/doc/board/index.rst b/doc/board/index.rst >> index 00e72f57cd..2bd740589b 100644 >> --- a/doc/board/index.rst >> +++ b/doc/board/index.rst >> @@ -13,6 +13,7 @@ Board-specific doc >> freescale/index >> google/index >> intel/index >> + kendryte/index > > We should use the board vendor name: sipeed/index> That's what I thought, but everything else in this directory is organized by CPU manufacturer. For example, it is doc/board/sifive/fu450.rst, not hifive.rst. Hence the naming scheme below. >> renesas/index >> sifive/index >> xilinx/index >> diff --git a/doc/board/kendryte/index.rst b/doc/board/kendryte/index.rst >> new file mode 100644 >> index 0000000000..5cbecd5731 >> --- /dev/null >> +++ b/doc/board/kendryte/index.rst >> @@ -0,0 +1,9 @@ >> +.. SPDX-License-Identifier: GPL-2.0+ >> + >> +Kendryte > > Sipeed > >> +======== >> + >> +.. toctree:: >> + :maxdepth: 2 >> + >> + k210 > > and use the board name here: maix, or k210-maix-bit ? > >> diff --git a/doc/board/kendryte/k210.rst b/doc/board/kendryte/k210.rst >> new file mode 100644 >> index 0000000000..14e0c22637 >> --- /dev/null >> +++ b/doc/board/kendryte/k210.rst >> @@ -0,0 +1,46 @@ >> +.. SPDX-License-Identifier: GPL-2.0+ >> + >> +K210 > > k210-maix-bit ? > >> +==== >> + >> +The Kendryte K210 processor is a 64-bit RISC-V CPU. This processor contains >> +several peripherals to accelerate neural network processing and other "ai" >> +tasks. This includes a "KPU" neural network processor, an audio processor >> +supporting beamforming reception, and a digital video port supporting capture >> +and output at VGA resolution. Other peripherals include 8M of sram (accessible >> +with and without caching); remappable pins, including 40 GPIOs; AES, FFT, and >> +SHA256 accelerators; a DMA controller; and I2C, I2S, and SPI controllers. Maix >> +peripherals vary, but include spi flash; on-board usb-serial bridges; ports for >> +cameras, displays, and sd cards; and ESP32 chips. Currently, only the Sipeed >> +Maix Bit V2.0 (bitm) is supported, but the boards are fairly similar. >> + >> +Documentation for Maix boards is located at . >> +Documentation for the Kendryte K210 is located at >> +. However, hardware details are rather lacking, >> +so most technical reference has been taken from the standalone sdk located at >> +. >> + >> +Build and boot steps >> +-------------------- >> + >> +To build u-boot, run >> + >> +make sipeed_maix_bit_defconfig >> +make CROSS_COMPILE= >> + >> +To flash u-boot to a maix bit, run >> +kflash -tp /dev/ -B bit_mic u-boot-dtb.bin >> + >> +Boot output should look like the following: >> + >> +U-Boot 2020.01-00455-gad03fd83e1 (Jan 15 2020 - 17:10:24 -0500) >> + >> +DRAM: 8 MiB >> +MMC: spi at 52000000:slot at 0: 0 >> +In: serial at 38000000 >> +Out: serial at 38000000 >> +Err: serial at 38000000 >> +=> >> + >> +Note that spi does not work! I will try to figure out how to make it work, but >> +for now the only way to boot something is to transfer it into ram over serial. >> diff --git a/include/configs/sipeed-maix.h b/include/configs/sipeed-maix.h >> new file mode 100644 >> index 0000000000..598f7dfdd0 >> --- /dev/null >> +++ b/include/configs/sipeed-maix.h >> @@ -0,0 +1,19 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright (C) 2019 Sean Anderson >> + */ >> + >> +#ifndef CONFIGS_SIPEED_MAIX_H >> +#define CONFIGS_SIPEED_MAIX_H >> + >> +#include >> + >> +#define CONFIG_SYS_LOAD_ADDR 0x80000000 >> +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_LOAD_ADDR >> +#define CONFIG_SYS_SDRAM_SIZE SZ_8M >> +/* Start just below AI memory */ >> +#define CONFIG_SYS_INIT_SP_ADDR 0x805FFFFF >> +#define CONFIG_SYS_MALLOC_LEN SZ_8K >> +#define CONFIG_SYS_CACHELINE_SIZE 64 >> + >> +#endif /* CONFIGS_SIPEED_MAIX_H */ >> -- > > Regards, > Bin > --Sean