From: Benjamin Herrenschmidt To: Geert Uytterhoeven , Subject: Re: Need testers with MESH SCSI Date: Tue, 26 Dec 2000 19:26:43 +0100 Message-Id: <19341120115827.19132@192.168.1.2> In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: >Note that there can be other problems with the mesh as well: I remember I once >had some early 2.3.x kernels that could not init the mesh when cold-booted, >only when warm-booted. So I had to boot an older kernel first each time I had >powered down my box :-) There were issues with powering up the MESH on some powerbooks that were fixed some time ago, but maybe your issue is unrelated. Looking at Darwin's MESH driver, they have a whole bunch of workarounds for known issues (either with common device protocol errors, or MESH internal races). Ben. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/