Return-Path: From: Robin Humble Message-ID: <199901281634.DAA10412@pixel.maths.monash.edu.au> Subject: Re: Installing Linux on an Indy with 1 HD Date: Fri, 29 Jan 1999 03:34:00 +1100 (EDT) In-Reply-To: from "Robbie Stone" at Jan 28, 99 03:33:28 pm Content-Type: text Sender: owner-linux@cthulhu.engr.sgi.com To: Robbie Stone Cc: nachtfalke@usa.net, linux@cthulhu.engr.sgi.com Message-ID: <19990128163400.hofPbGQYbDZfGXZq-MGwMcemDOZdQs25fE5boteBNBI@z> >Er, you can use gcc for most all of your building, as a matter of fact it Actually if you're talking about using gcc under IRIX then IRIX 5.3 doesn't come with the necessary header files to compile anything(*). You need the IDO or IRIX >= 6.5 which Alexander does not posess. Also just to clear up some apparent confusion (which may well be mine rather than Alexanders) in order to install SGI-Linux for Indy you don't actually need to compile anything... I would also point out that Linux on Indy doesn't support any X11 graphics yet. Swapping from IRIX 5.3 to something text-only could be a bit of a shock... But wait a few months and life could be all xPeaches and xCream :-) Personally I'd try to find a small (hyper-cheap/free) old SCSI drive (erm, 300-500M would do?) and install on that. Or do like Richard suggested and permanently run your Linux/Indy off a network root drive. cheers, robin (*) except the IRIX kernel. It uses a weirdly lobotomised compiler hidden well away... -- He'd found that even the people whose job of work was, so to speak, the Universe, didn't really believe in it and were actually quite proud of not knowing what it really was or even if it could theoretically exist. Robin Humble / http://www.maths.monash.edu.au/~rjh/