Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA03065 for ; Wed, 3 Feb 1999 15:25:11 -0800 (PST) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id PAA84096 for linux-list; Wed, 3 Feb 1999 15:24:31 -0800 (PST) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA92212 for ; Wed, 3 Feb 1999 15:24:25 -0800 (PST) mail_from (sgi.com!rachael.franken.de!hub-fue!alpha.franken.de!tsbogend) Received: from rachael.franken.de (rachael.franken.de [193.175.24.38]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id PAA02216 for ; Wed, 3 Feb 1999 15:24:23 -0800 (PST) mail_from (rachael.franken.de!hub-fue!alpha.franken.de!tsbogend) Received: from hub-fue by rachael.franken.de via rmail with uucp id for cthulhu.engr.sgi.com!linux; Thu, 4 Feb 1999 00:24:21 +0100 (MET) (Smail-3.2 1996-Jul-4 #4 built DST-Sep-8) Received: by hub-fue.franken.de (Smail3.1.29.1 #35) id m108BeY-002OmOC; Thu, 4 Feb 99 00:24 MET Received: (from tsbogend@localhost) by alpha.franken.de (8.8.7/8.8.5) id AAA02458 for linux@cthulhu.engr.sgi.com; Thu, 4 Feb 1999 00:13:37 +0100 Message-ID: <19990204001336.A1919@alpha.franken.de> Date: Thu, 4 Feb 1999 00:13:36 +0100 From: Thomas Bogendoerfer To: linux@cthulhu.engr.sgi.com Subject: HAL2 problem solved Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2 Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk Hi, look what my Indy tells me now: resetting global isr:0018 reset done isr:0000 reactivation done isr:0018 SGI HAL2 Processor, Revision 4.1.0 hal2: checking registers hal2: waiting isr:0019 idr0:0123 idr1:ffff idr2:0000 idr3:0000 hal2: finished waiting at cnt:1000 isr:0018 idr0:0123 idr1:ffff idr2:0000 idr3:0000 hal2: wrote #1 hal2: waiting isr:0019 idr0:0132 idr1:0231 idr2:0000 idr3:0000 hal2: finished waiting at cnt:1000 isr:0018 idr0:0132 idr1:0231 idr2:0000 idr3:0000 hal2: wrote #2 hal2: waiting isr:0019 idr0:0123 idr1:0231 idr2:0000 idr3:0000 hal2: finished waiting at cnt:1000 isr:0018 idr0:0123 idr1:0231 idr2:0000 idr3:0000 hal2: read #1 hal2: waiting isr:0019 idr0:0132 idr1:0231 idr2:0000 idr3:0000 hal2: finished waiting at cnt:1000 isr:0018 idr0:0132 idr1:0231 idr2:0000 idr3:0000 hal2: read #2 hal2: waiting isr:0019 idr0:0231 idr1:0231 idr2:0000 idr3:0000 hal2: finished waiting at cnt:1000 isr:0018 idr0:0231 idr1:0231 idr2:0000 idr3:0000 hal2: read #3 hal2: card found sgiaudio: initializing The problem was, that the access to HAL2 register must be 32bit wide, but they were only 16bit (I'll check in the fixed hal2.h in a couple of minutes). Silly me did the change yesterday, but the .o didn't get recompiled due to messed up dependencies:-( So I did some changes today and it worked, removed the changes and it still worked. Thomas. -- This device has completely bogus header. Compaq scores again :-| It's a host bridge, but it should be called ghost bridge instead ;^) [Martin `MJ' Mares on linux-kernel]