Message-Id: <199902171307.AA03826@mailgate1b.telekom.de> From: Heinz Mauelshagen Subject: [linux-lvm] Re: your mail Date: Wed, 17 Feb 1999 14:05:32 MET In-Reply-To: <99021711471501.00456@piglet>; from "Mark Alleyne" at Feb 17, 99 11:45 am Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: marka@a-wicked.demon.co.uk, linux-lvm@msede.com Cc: mge@u9ete.ez-darmstadt.telekom.de > > Hello, > > Firstly great product, Thanks. > but have a couple of questions > > 1. will we be able to use this as our boot disk [vg00] Yes, but not supported with the standard distribution. Hope to have supprt in the next release. > > 2. has anyone tested if lilo can handle /dev/vg00/lvol1 so it knows how to No, it can't because it deals with sectors on a single boot disk. You have to have a (small) boot partition (for eg. /dev/sda5) to boot from and have to change to the real-root-dev in a LV after activating volume groups. > boot the kernel, I would assume changes would need to be made to allow > lilo to issue a vgchange on the [vg00] volume group. LILO had to be enhanced to be able to load sectors from multiple disks if the root logical volume is not continuous. If it must stay continuous for LILO to be able to address kernel sectors to load there would not be a real enhancement compared to booting from a hard disk partition. On Intel compatible PCs BIOS restrictions limiting the number of BIOS addressable disks apply too (LILO uses the BIOS). > Or could we leave > /boot as a disk section and build into the kernel the ability to active > [vg00] ?? Yes, we could boot with LILO form a partition based boot FS and enhance the LVM driver init stuff to activate LV root. But this driver overhead is not necessary, if we boot from a small partition based fs anyway. OTOH it would make sense if LILO could directly load the kernel image from a LV. > > 3. are there plans for LVM-MIRRORING Yes, but no fixed time frame 8*( > > 4. for allowing root on lvm, is their anny recommended file system sizes and > should contingous be set for /boot ? /boot must be in a regular disk partition containing basic commands, device specials and LVM driver/commands. About 20-30MB should be sufficient to set this up. > > Sorry if some of these questions have been duplicated, at time of writing > couldn't see anything in the archive listing. > Maybe you like to subscribe to our new linux-lvm maling list at linux-lvm@msede.com by sending a "subscribe linux-lvm" in the body of the mail to majordomo@msede.com. Regards, Heinz -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Systemmanagement C/S Deutsche Telekom AG Entwicklungszentrum Darmstadt Heinz Mauelshagen Otto-Roehm-Strasse 71c Senior Systems Engineer Postfach 10 05 41 64205 Darmstadt mge@ez-darmstadt.telekom.de Germany +49 6151 886-425 FAX-386 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-