Received: from mailserv2.iuinc.com (mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id PAA11346 for ; Tue, 24 Aug 1999 15:20:13 -0600 Received: from milano.cup.hp.com (root@milano.cup.hp.com [15.16.124.11]) by palrel3.hp.com (8.8.6 (PHNE_17135)/8.8.5tis) with ESMTP id OAA24411 for ; Tue, 24 Aug 1999 14:21:12 -0700 (PDT) Received: from localhost (grundler@localhost [127.0.0.1]) by milano.cup.hp.com with SMTP (8.8.6 (PHNE_14041)/8.7.3 TIS Messaging 5.0) id OAA09713 for ; Tue, 24 Aug 1999 14:21:35 -0700 (PDT) Message-Id: <199908242121.OAA09713@milano.cup.hp.com> To: parisc-linux@thepuffingroup.com In-reply-to: Your message of "Tue, 24 Aug 1999 22:38:15 PDT." <19990824223815.E31994@mencheca.ch.genedata.com> Date: Tue, 24 Aug 1999 14:21:35 -0700 From: Grant Grundler Subject: [parisc-linux] Booting 715/100 List-ID: I finally managed to build a kernel from the 08/07/99 tar file. Now I can't boot it! I might need to update the source tree again but need to figure out how CVS can operate through HP's firewall. Here's the /etc/bootptab entry: linuxferris:\ hd=/linux/linux-2.2.3/arch/parisc/boot:\ bf=Image:\ vm=rfc1048:\ ht=ether:\ ha=0800097B9230:\ sm=255.255.248.0:\ ip=15.16.122.147 Where "/linux/linux-2.2.3" is the kernel source tree. I also wasn't sure about the difference between CONFIG_PA7100 and CONFIG_PA7300 in the .config file. I thought the 715/100 is an older machine before 7300LC was available and thus is PA7100. Is this right? "lifls Image" returns lifls: Can't list Image; not a LIF volume Whereas "file Image" says: Image: lif file ...can anyone explain this? Lastly, I've attached the console output. thanks, grant BOOT_ADMIN> inf System model number: HP 9000/715/100 Processor revision 2.4 100MHz Instruction Cache Size: 131072 Data Cache Size: 131072 Memory Size: 64 MB Built in floating point coprocessor Board Serial Number 40SM891817 BootRom Version 1.6 auto boot on auto search on fastboot on Primary boot path: scsi.6.0 Alternate boot path: lan.000000-000000.0.0 Console path: graphics_1.1 Keyboard path: ps2 LAN Station Addresses: 080009-7B9230 080009-7B9231 BOOT_ADMIN> sea lan Searching for potential boot device. This may take several minutes. To discontinue, press ESCAPE. Device Path Device Type ----------- ----------- lan.15.16.121.48.3.52 BOOT_ADMIN> bo lan.15.16.121.48.3.52 0x06.C740 Attempting to boot. Loading Initial Program Loader 0x06.8007 0x06.8007 0x06.8007 0x06.8007 ERROR: Cannot load IPL, error detected 0x06.C7F0 Boot process failed. press to Continue.