Message-Id: <199908271940.AA21078@mailgate1b.telekom.de> From: Heinz Mauelshagen Subject: Re: [linux-lvm] LVM and devices Date: Fri, 27 Aug 1999 21:37:13 METDST In-Reply-To: <37C6AE9E.A93F0D8A@geotec.net>; from "mrharris" at Aug 27, 99 10:28 am Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: mrharris Cc: mge@ts1.ez-darmstadt.telekom.de, linux-lvm@msede.com > > I may be a day late and a dollar short here, but I experienced a problem > this morning when I added a new scsi drive to my 2.2.10 system. I know > that the os scans for devices when the system boots and assigns device > names then. Well this screwed up my volume groups because sda1 is now > sdb1, you get the idea nothing new here. I know this has been discussed > before. Run vgscan and VGs should be o.k. again. > In AIX new devices are assigned and that's the way it stays unless you > manually delete the device and readd it so that when one of your mirred > drives gets blown away or you add a drive the assignments are the same > (more to it than this but you get the idea). I believe this needs to > change in linux before LVM is added to the kernel, life would be much > simpler (md is effected by this as well I beleive). LVM does need to be > there though, the old way is just that the old way. I don't know how I > would live without LVM when you manage over 200 systems. Just my > opinion. > > add LVM to 2.4 -- YES. > Heinz -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Systemmanagement CS-TS T-Nova Entwicklungszentrum Darmstadt Heinz Mauelshagen Otto-Roehm-Strasse 71c Senior Systems Engineer Postfach 10 05 41 64205 Darmstadt mge@ez-darmstadt.telekom.de Germany +49 6151 886-425 FAX-386 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-