Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id PAA02567 for ; Wed, 15 Sep 1999 15:54:18 -0600 Date: Wed, 15 Sep 1999 23:56:23 +0200 From: Philipp Rumpf To: Grant Grundler Cc: parisc-linux@thepuffingroup.com Subject: Re: [parisc-linux] 715/100 bootpd fails Message-ID: <19990915235623.D8112@suse.de> References: <199909151508.IAA19696@milano.cup.hp.com> <199909152122.OAA20249@milano.cup.hp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <199909152122.OAA20249@milano.cup.hp.com>; from Grant Grundler on Wed, Sep 15, 1999 at 02:21:50PM -0700 List-ID: > Building "Image" but can't boot it via bootpd. > Here's what I've worked through so far...ideas? > > My 715/100 (firmware 1.6, 64MB RAM, no disk) complains > "ERROR: Cannot load IPL, error detected" > from either a 11.00 or 10.20 bootpd host. > "sea lan" at the target "BCH" (aka BOOT_ADMIN) shows both hosts. > I think bootpd is configured "close enough" and the target > box is finding both bootpd servers and "Image" on each. I did > have a problem with public read permission on one host but > fixed that. My guess is your bootpd / tftpd does not work properly. Just as it might help, here is my configuration: /etc/bootptab: puffin:ha=0010830329ee:ip=10.10.0.95:sm=255.255.0.0:bf=/tftpboot/kernel-puffin:td=/tftpboot/ herring:ha=08000987F208:ip=10.10.0.96:sm=255.255.0.0:bf=/tftpboot/kernel-herring:td=/tftpboot/ tftpd is started from inetd, inetd.conf line is: tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot $ tftp localhost tftp> get kernel-puffin Received 1039957 bytes in 1.2 seconds tftp> get kernel-herring Received 1039957 bytes in 1.1 seconds tftp> # bootpd -d9 bootpd: info(6): bootptab mtime: Thu Jul 8 16:27:42 1999 bootpd: info(6): reading "/etc/bootptab" bootpd: info(6): read 2 entries (2 hosts) from "/etc/bootptab" bootpd: info(6): recvd pkt from IP addr 0.0.0.0 bootpd: info(6): bootptab mtime: Thu Jul 8 16:27:42 1999 bootpd: info(6): request from Ethernet address 00:10:83:03:29:EE bootpd: info(6): found 10.10.0.95 (puffin) bootpd: info(6): bootfile="/tftpboot/kernel-puffin" bootpd: info(6): vendor magic field is 99.130.83.99 bootpd: info(6): sending reply (with RFC1048 options) bootpd: info(6): setarp 10.10.0.95 - 00:10:83:03:29:EE I have no idea how to translate all that to HP/UX. > grundler <421>tail /etc/bootptab > lego02b:\ > hd=/linux/linux/arch/parisc/boot:\ > bf=Image:\ appropriate permissions on this ? is tftpd started with / as root (not /tftpboot as usual) ? Philipp Rumpf