Message-Id: <199909220841.AA06727@mailgate1b.telekom.de> From: Heinz Mauelshagen Subject: Re: [linux-lvm] ERROR -157 reading data Date: Wed, 22 Sep 1999 10:41:27 METDST In-Reply-To: <001201bf0495$017ef940$030116ac@fd1>; from "Fernando Dammous" at Sep 21, 99 9:54 pm Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ferdam@internetcom.com.br Cc: mge@ts1.ez-darmstadt.telekom.de, linux-lvm@msede.com Hi Fernando, looks like something has overwritten parts of the VGDA (metadata aka Volume Group Descriptor Area) on /dev/hdb2. > > Hi all, > > I have created my vg00 (/dev/hdb2) with 1 LV (lv00).=20 > After mounting it, I can work fine with lv00.=20 > But, on next boot, vgscan removes /etc/lvmtab and /etc/lvmtab.d and it = > isn't able to create a new set of these files. > > vgscan -- reading data of volume group "vg00" from physical volume(s) > vgscan -- ERROR -157: can't get data of volume group "vg00" from = > physical volume(s) > vgscan -- ERROR -157: creating "/etc/lvmtab" and "/etc/lvmtab.d" This error indicates, that the number of logical volumes differs between the VG part and the LV part(s) of the VGDA. > > With others LVM tools also give almost same msgs : > > vgcfgbackup -- reading volume group data for "vg00" from disk(s)I=20 > vgcfgbackup -- ERROR -157: reading VGDA of "vg00" > vgcfgbackup -- ERROR -313: backing up volume group "vg00" > > vgck -- reading volume group data for "vg00" from physical volume(s) > vgck -- ERROR -157: reading data of volume group "vg00" from physical = > volume(s) > vgck -- please DON'T run vgscan prior to vgcfgrestore Please have a look at FAQ question 8. Do you have an actual backup in /etc/lvmconf ?. Please look with "ls -lt /etc/lvmconf/vg00*" for a recent backup. If yes you are a lucky man 8*) Say you have /etc/lvmconf/vg00.conf then restore it with "vgfgrestore -f /etc/lvmconf/vg00.conf -n vg00 /dev/hdb2" and retry "vgscan;vgchange -ay" > > My disk is a IDE 3.2GB with 2 partitions : > # fdisk -l /dev/hdb > > Disk /dev/hdb: 128 heads, 63 sectors, 785 cylinders > Units =3D cylinders of 8064 * 512 bytes > > Device Boot Start End Blocks Id System > /dev/hdb1 1 5 20128+ 83 = > Linux native > /dev/hdb2 6 785 3144960 83 = > Unknown You mean partition Id fe, do you? > > The LVM program is built into my kernel (2.0.36) not as a module. > Am I missing something in my configuration? > O.k. > Please help me! > > Thanks in advance, > > Fernando Dammous > Regards, Heinz -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Systemmanagement CS-TS T-Nova Entwicklungszentrum Darmstadt Heinz Mauelshagen Otto-Roehm-Strasse 71c Senior Systems Engineer Postfach 10 05 41 64205 Darmstadt mge@ez-darmstadt.telekom.de Germany +49 6151 886-425 FAX-386 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-