Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id KAA01825 for ; Tue, 28 Sep 1999 10:20:42 -0600 Message-Id: <199909281619.JAA05140@milano.cup.hp.com> To: Ulrich Strelow cc: parisc-linux@thepuffingroup.com Subject: Re: [parisc-linux] Booting from tape In-reply-to: Your message of "Tue, 28 Sep 1999 07:48:46 PDT." <19990928144846.10298.rocketmail@send205.yahoomail.com> Date: Tue, 28 Sep 1999 09:19:28 -0700 From: Grant Grundler List-ID: Ulrich Strelow wrote: > I know that this is extremely low priority but... > > I have tried to boot the linux kernel from a SCSI DDS > tape (copied via dd if=Image of=/dev/rmt/0m bs=512). > The same kernel (cvs tree from today) boots > sucessfully via rbootd on my 715/33. Here is the > console log: ... > Select from menu: b p2 > > Trying scsi.0.0 > Boot path initialized. > Attempting to load IPL. > > Failed I/O operation with scsi.0.0 > ENTRY_IO status = -10 > > 00000000 00000000 00000000 00000000 00000000 00000000 > 00000000 00000000 > 00000000 00000000 00000000 00000000 00000000 00000000 > 00000000 00000000 > 00004F04 000000FF FF0009BF 00000000 800100DC 00000000 > 0025F000 00000400 > 98080000 00000000 00008C60 00000000 000000FF 00000000 > 00000000 00000000 I believe this is a problem with either how the tape was created or talking to the tape drive. Does anyone know where to find what the -10 status means? Another difference when booting from tape (vs disk), is how the tape is "made". One *must* specify 2k block size. It doesn't matter for disk devices. Eg: dd if=Image of=/dev/rmt/0m bs=2k I don't know if Image is intentionally padded to a 2k block size. One might check that too. grant Grant Grundler Communications Infrastructure Computer Operations +1.408.447.7253