Message-Id: <199910181655.AA11114@mailgate1b.telekom.de> From: Heinz Mauelshagen Subject: Re: [linux-lvm] FAQ Question not found Date: Mon, 18 Oct 1999 18:54:14 METDST In-Reply-To: <000801bf197e$45d7af80$0ebcfea9@brd>; from "Nicolas Brouard" at Oct 18, 99 5:34 pm Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: brouard@ined.fr Cc: mge@ts1.ez-darmstadt.telekom.de, linux-lvm@msede.com Hi Nicolaus. > > I have used and appreciated LVM on AIX for years. The main use for me > consisted in having initially a hard disk too big for my actual but > increasing needs. > It was very nice to increase a filesystem like /home /usr/local or /var when > mail traffic increased. > Now I have a similar need. I am using a laptop with 2Gb. I bought a 6Gb hard > disk which should replace the old one. I would like to have at the beginning > 2Gb for Win98 and some initially small logical volumes for a Linux system. > With my 2Gb old disk, I used 1Gb for Windows and 1Gb for Linux. > > Is it a good idea to try to implement LVM for the linux partition? Yes 8*) > How does it deal with other partitions and the limitation to 4 primary partitions. Regular and LVM used partitions can coexist on the same disk(s). > How to begin? Should I first install Linux with arbitrary partitions, and > then build a LVM kernel and then? I do only have one physical disk and can't > play so much with other partitions. Yes, install a basic root only system which doesn't eat to much of your space, install LVM, setup VG(s) and LVs (for /usr, /opt etc), build filesystems, mount them and transfer data from your small root fs to the corresponding LVM based filesystems, change /etc/fstab, put vgscan and "vgchange -ay" into your system startup script (for eg. /sbin/init.d/boot for SuSE) before ext2 mounts and reboot. Install additional packages. > > In fact I do not understand how it works. On AIX, all the disk was managed > with LVM? With Linus LVM you are free to manage some disks/partitions or all. > Here, can I decide that logical volume manager will only deal with > a big ext2 partition. And within this partition I would be able to have > variable sized /var /home / ? No, no ext2 partition. In fact you can use loop devices for evaluation purposes. But this is _not_ recommended for production systems. Use disk partitions, mutliple devices or total disks instead. In pratice only having 1 disk in the first place, use at least 1 partition, set the partition identifier to 0xfe with fdisk, do a "pvcreate /dev/YourPartition", "vgcreate YourVG /dev/YourPartition" and some lvcreate(s). For further command information, please have a look at the corresponding manuals. > > I would appreciate any help, even if it is: Ok, do fixed partitions and not > LVM! > Regards, Heinz Please look into lvm(8) and LVM-HOWTO for additional information. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Systemmanagement CS-TS T-Nova Entwicklungszentrum Darmstadt Heinz Mauelshagen Otto-Roehm-Strasse 71c Senior Systems Engineer Postfach 10 05 41 64205 Darmstadt mge@ez-darmstadt.telekom.de Germany +49 6151 886-425 FAX-386 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-