Message-Id: <199910201149.AA09133@mailgate1b.telekom.de> From: Heinz Mauelshagen Subject: Re: [linux-lvm] how to remove PV from a VG? Date: Wed, 20 Oct 1999 13:48:40 METDST Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-lvm@msede.com > > Heinz Mauelshagen (mauelsha@ez-darmstadt.telekom.de) wrote : > > > > > > > Hey folks, > > > > > > > Hi Freddy. > > > > > the subject says it (almost) all, I need to remove three PVs that were added to my VG by mistake (namely /dev/sdi, /dev/sdj and /dev/sdk), I guess you see where the error is. I can access data on previous PVs (yet), but don't know how to remove PVs, there is nothing linke 'pvremove'. I can assure you there is no data (perhaps except signature) on those disks. > > > > > > > vgreduce YourVG /dev/sd[i-k] > > > > - or, if the 3 partitions hold the only empty PVs of YourVG - > > > > vgreduce -a YourVG > > yes, helped quite enough, just the /dev/sd[ghi] devices are still in list of valid PVs and when I run pvscan my partitions get destroyed (I suppose because of rewriting LVM marker to the device). How do I really, physically remove the devices from the PV list? Set the partition type identifier to something different than 0xfe. regards, Heinz -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Systemmanagement CS-TS T-Nova Entwicklungszentrum Darmstadt Heinz Mauelshagen Otto-Roehm-Strasse 71c Senior Systems Engineer Postfach 10 05 41 64205 Darmstadt mge@ez-darmstadt.telekom.de Germany +49 6151 886-425 FAX-386 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-