Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id PAA11781 for ; Tue, 26 Oct 1999 15:16:30 -0600 Received: from milano.cup.hp.com (milano.cup.hp.com [15.16.124.11]) by palrel1.hp.com (Postfix) with ESMTP id B1D2F228 for ; Tue, 26 Oct 1999 14:17:32 -0700 (PDT) Received: (from grundler@localhost) by milano.cup.hp.com (8.8.6 (PHNE_14041)/8.7.3 TIS Messaging 5.0) id OAA04010 for parisc-linux@thepuffingroup.com; Tue, 26 Oct 1999 14:17:59 -0700 (PDT) Date: Tue, 26 Oct 1999 14:17:59 -0700 (PDT) From: Grant Grundler Message-Id: <199910262117.OAA04010@milano.cup.hp.com> To: parisc-linux@thepuffingroup.com Mime-Version: 1.0 Content-Type: text/plain; charset=X-roman8 Subject: [parisc-linux] B180L console output List-ID: FYA, Similar story but no DEC PPB. grant pa Primary boot path: FWSCSI.6.0 Alternate boot path: PCI1.3.0 Console path: GRAPHICS(0) Keyboard path: PS2 Main Menu: Enter command > io fv ERROR: Unknown command Main Menu: Enter command > in fv FIRMWARE INFORMATION Firmware Version: 5.8 3840 Main Menu: Enter command > bo alt Interact with IPL (Y, N, Q)?> n Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ------------------------------------------------------------------------------ PARISC/Linux Bootstrap Version 0.6 (non-interactive) By Helge Deller & Jason Eckhardt Built Wed Oct 20 15:37:11 PDT 1999 by grundler@rock Reading parameters...done. Loading PA-RISC/Linux Kernel... SOM-Kernel: aux_header_location: 00000080 som : 00200080 exec_dfile: 000F2000 exec_dsize: 0008E000 exec_dmem : C00B7000 exec_tfile: 0004B000 exec_tsize: 000A6008 exec_tmem : C0010000 Code at 0x00010000, size=0x000A6008 Data at 0x000B7000, size=0x0008E000 BSS at 0x00145000. Transferring control to kernel. (At entry point 0x00010000) The Kernel has started... FP CCR was 0x0, will be set to 0xc0 Model: Merlin L2+ 180 (9000/778/B180L) with 128 MB RAM. CPU(s): 1 x PA7300LC (PCX-L2, Velociraptor) at 180.000000 MHz Kernel-stack at C00BA000, Size 8192 kB. Available virtual mapped memory starts at 0xC01741F0 and ends at 0xC8000000. Searching for devices in PDC firmware... a newer box... Found devices: 1. Phantom PseudoBC GSC+ Port (7) at 0xffc00000, versions 0x504, 0x0, 0x0, 0x0, 0x0 2. Merlin+ 132 Dino RS-232 (10) at 0xfff83000, versions 0x22, 0x0, 0x8c, 0x0, 0x0 3. Merlin L2+ 180 (9000/778/B180L) (0) at 0xfffbe000, versions 0x504, 0x0, 0x4, 0x0, 0x81 4. Merlin+ L2 180 (1) at 0xfffbf000, versions 0x5a, 0x0, 0x9, 0x0, 0x0 5. Merlin+ 180 Core BA (11) at 0xffd00000, versions 0x3f, 0x0, 0x81, 0x0, 0x0 6. Merlin+ 180 Core RS-232 (10) at 0xffd05000, versions 0x3f, 0x0, 0x8c, 0x0, 0x0 7. Merlin+ 180 Core SCSI (10) at 0xffd06000, versions 0x3f, 0x0, 0x82, 0x0, 0x0 8. Merlin+ 180 Core Centronics (10) at 0xffd02000, versions 0x3f, 0x0, 0x74, 0x0, 0x0 9. Merlin+ 180 Core Audio (10) at 0xffd04000, versions 0x3f, 0x4, 0x7b, 0x0, 0x0 10. Merlin+ 180 Core PC Keyboard (10) at 0xffd08000, versions 0x3f, 0x0, 0x84, 0x0, 0x0 11. Merlin+ 180 Core PC Keyboard (10) at 0xffd08100, versions 0x3f, 0x0, 0x84, 0x0, 0x0 12. Gecko GSC Core Graphics (10) at 0xf8000000, versions 0x16, 0x0, 0x85, 0x0, 0x0 13. Dino PCI Bridge (13) at 0xfff80000, versions 0x680, 0x3, 0xa, 0x0, 0x0 That's a total of 13 devices. Linux version 2.2.12 (grundler@rock) (gcc version egcs-2.91.60 19981201 (egcs-1.1.1 release)) #341 Tue Oct 26 13:07:06 PDT 1999 initrd: c00be000-c0115800 command_line: /stand/vmlinux HOME=/ TERM=LINUX console=tty free_area_init: c017e000 c2000000 mem_map=c017e000 Calibrating delay loop... 239.86 BogoMIPS Memory: 14532k available (664k kernel code, 1124k data, 64k init) [c0000000,c1000000] POSIX conformance testing by UNIFIX Lasi version 0 at 0xffd00000 found. Interrupt 3( 3+ 0) Starting lasi serial #0 at 0xfff83000 lasi_alloc_irq(0xc01657b8): No known LASI owns device at 0xfff83000 IRQ not found for lasi serial at 0xfff83000 Warning : device (10, 0x22, 0x0, 0x8c, 0x0) NOT claimed by Lasi serial 712, 715 or similiar Starting lasi serial #0 at 0xffd05000 lasi_alloc_irq(0xffd05000) = 26 ttyS00 at iomem 0xffd05800 (irq = 261) is a 16550A Initializing lasi keyboard port at 0xffd08000... Initializing lasi mouse port at 0xffd08100... Dino version 3.1 (bridge mode) found at 0xfff80000 Scanning PCI bus 0 Found a PCI device, and the vendor is 0x1000, device 0x000f PCI: 00:08 BAR[0]==0xfd01 PCI: 00:08 BAR[1]==0xf0ffb000 PCI: 00:08 BAR[2]==0xf0ffc000 PCI: 00:08 BAR[3]==0x0 PCI: 00:08 BAR[4]==0x0 PCI: 00:08 BAR[5]==0x0 Found a PCI device, and the vendor is 0x1000, device 0x000f PCI: 00:98 BAR[0]==0xfe01 PCI: 00:98 BAR[1]==0xf0ffd000 PCI: 00:98 BAR[2]==0xf0ffe000 PCI: 00:98 BAR[3]==0x0 PCI: 00:98 BAR[4]==0x0 PCI: 00:98 BAR[5]==0x0 Found a PCI device, and the vendor is 0x1011, device 0x0019 PCI: 00:a0 BAR[0]==0xff01 PCI: 00:a0 BAR[1]==0xf0fff000 PCI: 00:a0 BAR[2]==0x0 PCI: 00:a0 BAR[3]==0x0 PCI: 00:a0 BAR[4]==0x0 PCI: 00:a0 BAR[5]==0x0 dino_fixup_bus(0xc01da0a0) bus 0 sysdata 0xc01d90e0 Scan for bus 0 returned 0 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 Starting kswapd v 1.2 setting up lasi keyboard initialize_kbd: Keyboard failed self test lasi_alloc_irq(0xffd08000) = 5 done!?! Serial driver version 4.90 (1999-09-22) with<4>Keyboard timed out[1] Keyboard timeout[2] Keyboard timed out[1] Keyboard timeout[2] no serial options enabled pty: 256 Unix98 ptys configured rd_init RAM disk driver initialized: 16 RAM disks of 4096K size scsi : 0 hosts. scsi : detected total. initrd_load rd_load_image opening initrd identify_ramdisk_image ext2sb->s_magic: 000053ef RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 350 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/done. initrd_release VFS: Mounted root (ext2 filesystem). Warning: unable to open an initial console. It's for the PA-RISC! It's executable! It has an appropriate version! The checksum checks out! Well, it *smells* like a valid SOM executable (start_brk) 40017000 (end_code) 0003c000 (start_code) 00001000 (end_data) 40008000 (start_stack) 2000002c (brk) 40017000 Kernel panic: Attempted to kill the idle task! In swapper task - not syncing