Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id EAA04806 for ; Sun, 7 Nov 1999 04:09:43 -0700 Date: Sun, 7 Nov 1999 12:12:05 +0100 From: Matthew Wilcox To: Philipp Rumpf Cc: Matthew Wilcox , parisc-linux@thepuffingroup.com Subject: Re: [parisc-linux] sash commands Message-ID: <19991107121205.M25252@mencheca.ch.genedata.com> References: <19991105021334.J25252@mencheca.ch.genedata.com> <19991106193330.I11609@mathe.stud.uni-erlangen.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <19991106193330.I11609@mathe.stud.uni-erlangen.de>; from Philipp Rumpf on Sat, Nov 06, 1999 at 07:33:30PM +0100 List-ID: On Sat, Nov 06, 1999 at 07:33:30PM +0100, Philipp Rumpf wrote: > > -mount is known to not work. I need to speak to prumpf about why this is. > > If I see this correctly this is the 4-argument problem. Our current (hacked) > syscall support only supports the register arguments because supporting the > other ones too just would mean nobody ever got around to fix syscall support :) Partly. I should be less gnomic.. Yes, the 4-argument problem is relevant, but it's not the only thing. sash (since it's a linux program) uses the linux arguments to sys_mount(), so rather than both writing hpux_mount(), I decided to convince sash to use the Linux entry point for sys_mount(), and that's what the sash-willy in puffin.external.hp.com's /tmp has different to the other sashes. Then I discovered that Linux syscalls were not working because we didn't have a page mapped at 0xC000'1000, then I discovered we didn't have a page mapped at 0xC000'0000 either and there was instead a nasty kludge in fault.c to handle hpux syscalls. So I added a nasty kludge in there to make linux syscalls work too (and they don't have the 4-argument limitation, due to the syscall convention which I decreed). Now I'm blundering around in the mm system trying to figure out how to get gateway pages working properly. > If anyone else needs to send me email (or needed in the last two weeks or so), > please use the new ugly address Philipp.H.Rumpf@mathe.stud.uni-erlangen.de. As > I don't work for SuSE any more, prumpf@suse.de is very likely to be invalid > shortly and I am not sure how often I'll be able to check it before. The return address on this one was prumpf@mathe.stud.uni-erlangen.de. I'm using the ugly address you quote there. > > Ditto -sync. > > what's the problem with sync ? The same as the problem with -umount -- rather hard to test that it's working :-) -- Matthew Wilcox "Windows and MacOS are products, contrived by engineers in the service of specific companies. Unix, by contrast, is not so much a product as it is a painstakingly compiled oral history of the hacker subculture." - N Stephenson