Date: Wed, 22 Dec 1999 20:11:28 +0100 From: Luca Berra Subject: Re: [linux-lvm] booting w/o initrd Message-ID: <19991222201127.C13180@colombina.comedia.it> Reply-To: bluca@comedia.it References: <3860D151.21FD732B@twc.de> Mime-Version: 1.0 In-Reply-To: <3860D151.21FD732B@twc.de> Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-lvm@msede.com there are some good ideas here, i will only point the problems. On Wed, Dec 22, 1999 at 02:25:37PM +0100, Ulf Bartelt wrote: > And when bringing the system down, LVM can be stopped cleanly because the > root filesystem is only addressed via the partition alias. add mirrored LV to the equation and you'll obtain a mess. > But what if ... > --------------- > > ... you want to resize the root? > > It is not much more complicated to do this compared to booting via initrd. > Even when booting via initrd, you cannot resize the root while it is > mounted. So this way is not responsible for the main problem in resizing > the root. it is, you are adding one more constraint, that the root must be contiguous. enjoy pvmoving things around (if you have 2 disks) btw you can resize a mounted filesystem, and i hope this wil become standard practice. what's the problem with initrd, just look at it as a very big __initfunc(), just easier to debug. L. -- Luca Berra -- bluca@comedia.it Communication Media & Services S.r.l.