From: Lokesh Vutla Date: Tue, 7 Apr 2020 13:01:33 +0530 Subject: [PATCH] ARM: omap3_logic boards: Convert to DM_ETH In-Reply-To: <20200326152607.28587-1-aford173@gmail.com> References: <20200326152607.28587-1-aford173@gmail.com> Message-ID: <1c3ea097-ee55-c82d-8d75-c0a303ceea9b@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 26/03/20 8:56 PM, Adam Ford wrote: > With the converstion of SMC911x to DM, this can facilitate the omap3 > boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. > There isn't a clean solution to doing this in phases, so the boards are > all being done together to avoid breaking functionality. > > Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs > to show the address of the ethernet controller for each board. > > The board file, which is common betwen the OMAP35 and DM37 SOM LV and > Torpedo boards, can remove the manual ethernet initialization, but it > still needs to register the address and GPMC configuration for the Ethernet > controller which is now being moved around to board_late_init(). > > Lastly, this patch updates the various config files to add the reference > for DM_ETH and remove the SMC address, which is now fetched from the > newly created device tree nodes. > > Signed-off-by: Adam Ford Applied to u-boot-ti. Thanks and regards, Lokesh