Message-Id: <200005281535.RAA03544@piglet.grunz.lu> Date: Sun, 28 May 2000 17:35:11 +0200 (CEST) From: Michel Lanners Reply-To: mlan@cpu.lu Subject: Re: ide_dmaproc - YaBoot To: Henning.Loeser@Physik.Uni-Marburg.DE cc: erbenson@alaska.net, linuxppc-dev@lists.linuxppc.org In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi there, On 28 May, this message from Henning Loeser echoed through cyberspace: > Something else seems to be fishy aswell maybe the driver (???) or > whatever. I went ahead and tried a new 2.4.0test1-ac1 kernel and all of > the sudden the driver doesn't even see the drive any more ... : > AEC6260R: IDE controller on PCI bus 00 dev 68 > AEC6260R: chipset revision 1 > AEC6260R: not 100% native mode: will probe irqs later > AEC6260R: ROM enabled at 0x80810000 > AEC6260: reg49h=0x00 ATA-66 Cable Port0 > ide0: BM-DMA at 0x0800-0x0807, BIOS settings: hda:pio, hdb:pio > AEC6260: reg49h=0x00 ATA-66 Cable Port1 > ide1: BM-DMA at 0x0808-0x080f, BIOS settings: hdc:pio, hdd:pio > hda: ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ, ATA DISK drive > ide0 at 0x840-0x847,0x000 on irq 23 ^^^^^^^^^^^ You're not using my PCI patches. I'm amazed it finds anything at all on your card; but anyway, get my latest 2.3.99 patches (2.3.99-pre9, that is), and apply them. From the above, it seems only part of the communication of the card with the driver works ok, whereas the rest reads schrott. Michel ------------------------------------------------------------------------- Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email mlan@cpu.lu | http://www.cpu.lu/~mlan | Learn Always. " ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/