Message-Id: <200009222037.WAA00829@piglet.grunz.lu> Date: Fri, 22 Sep 2000 22:37:55 +0200 (CEST) From: Michel Lanners Reply-To: mlan@cpu.lu Subject: Re: Re; 2.4.0-test9 on B&W G3 To: benh@mipsys.com cc: linuxppc-dev@lists.linuxppc.org In-Reply-To: <20000922164705.32547@mail.mipsys.com> MIME-Version: 1.0 Content-Type: TEXT/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Ben, On 22 Sep, this message from Benjamin Herrenschmidt echoed through cyberspace: > This changeset revives Geert PCI code, adds Samuel fix (indeed the > correct fix), and > add some more IDE fix for PCI-IDE controllers like the CMD646. The pci_enable_device() in your changeset is not enough, unfortunately. My Promise Ultra66 (which others, including Andre Hedrick also use) doesn't identify as an IDE storage controller: [mlan@piglet ~]$ lspci 00:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge (rev 03) 00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20262 (rev 01) Would it be possible to select on mass storage in general? If that is an 'official' classification, that is... Michel ------------------------------------------------------------------------- Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email mlan@cpu.lu | http://www.cpu.lu/~mlan | Learn Always. " ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/