Date: Wed, 28 Feb 2001 20:07:56 -0500 From: Konstantin Olchanski To: linuxppc-dev@lists.linuxppc.org Subject: Re: Problem requesting IRQ with 2.4.2 kernel Message-ID: <20010228200756.E252@ux1.phy.bnl.gov> References: <200102280559.XAA05414@lists.linuxppc.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <200102280559.XAA05414@lists.linuxppc.org>; from owner-linuxppc-dev-digest@lists.linuxppc.org on Tue, Feb 27, 2001 at 11:59:28PM -0600 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: > Date: Tue, 27 Feb 2001 17:56:53 +0100 > From: xav > Subject: Problem requesting IRQ with 2.4.2 kernel > > Hi ! > > I'm using a clone of the bk tree to compile a 2.4.2 kernel. > I have also downloaded the code from Gabriel Paubert for the > pci2vme chip from TUNDRA. > I see the same problem- on my kernels (older bitkeeper 2.4 tree) pdev->irq comes out as zero. By experimenting, I determined (and hardwired into the driver) a working Universe irq on the MVME230x: "11". I do not know how to kludge the "prep" routing tables- none of the numbers in those tables match the board and vxworks BSP documentation. I guess this will be ultimately fixed by Matt Porter's new MVME support in the 2.5 tree. -- Konstantin Olchanski Physics Department, Brookhaven National Laboratory, Long Island, New York olchansk@bnl.gov ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/