Message-Id: <200106240954.LAA00837@piglet.grunz.lu> Date: Sun, 24 Jun 2001 11:54:29 +0200 (CEST) From: Michel Lanners Reply-To: mlan@cpu.lu Subject: Re: getting the 8600 to boot 2.4.5 To: guillaume.laures@noos.fr Cc: linuxppc-dev@lists.linuxppc.org In-Reply-To: <3B337C7B.1040309@noos.fr> MIME-Version: 1.0 Content-Type: TEXT/plain; charset=iso-8859-1 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On 22 Jun, this message from Guillaume Laurès echoed through cyberspace: > The trick is that in 2.4 kernel, linux tries to open the first frame > buffer, and on machines of the 8x00 class this mean opening the sixty > convoluer, a frame buffer that allows the use of the video output (Y/C > and composite). Ah, there it is! I've long wondered how Sixty6 would appear in the device tree ;-) > Unfortunately, linux has not a driver for it Would be a fun project to write one ;-) [snip] > controlfb: Memory bank 1 present, bank 2 absent, total VRAM 2MB > > On a side note, this is wrong, I have the 2 banks filled, but I'll check > this later Yeah; Takashi Oe fixed the VRAM detection for good, but it seems his patches have not made into any released tree yet. Maybe it's in BenH's tree; but I didn't check recently. If you're desperate, I can try to dig it out. Michel ------------------------------------------------------------------------- Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email mlan@cpu.lu | http://www.cpu.lu/~mlan | Learn Always. " ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/