Message-Id: <200109041415.KAA27697@orchid.cspi.com> Content-Type: text/plain; charset="iso-8859-1" From: Brian Waite Reply-To: bwaite@cspi.com To: linuxppc-embedded@lists.linuxppc.org Subject: Re: mvme5100 one more time... Date: Tue, 4 Sep 2001 10:06:59 -0400 References: <85256ABC.00556948.00@pine.cspi.com> In-Reply-To: <85256ABC.00556948.00@pine.cspi.com> MIME-Version: 1.0 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Xavier, Just a quick sanity check, are all the jumpers at factory default and have you changed any env settings? Just a thought. Thanks Brian On Monday 03 September 2001 11:32 am, you wrote: > Le sam, 01 sep 2001 01:29:04, Tom Rini a > écrit : > > And if this fails, I just thought of one more thing (I need some hw I can > > test this on locally...). > > Look for: > > bl flush_instruction_cache > > And add #if 0/#endif around that and try again... > > I have done a pull this morning and applied your patchs. I have the same > results even > after the bl flush_instruction_cache suppression. > > Here is the result : > Network Boot File load in progress... To abort hit > > Bytes Received =&701661, Bytes Loaded =&701661 > Bytes/Second =&701661, Elapsed Time =1 Second(s) > > Exception: Program (Illegal Instruction) > SRR0 =001F0000 SRR1 =00083040 Vector-Offset =00700 > IP =001F0000 MSR =00003040 CR =00000000 FPSCR =00000000 > R0 =00000000 R1 =03F00000 R2 =00000000 R3 =00000000 > R4 =00000000 R5 =49504C01 R6 =00007000 R7 =001F0000 > R8 =03F0CF54 R9 =03F0CD54 R10 =03F0CD60 R11 =03F0CE54 > R12 =03F0CE54 R13 =00000000 R14 =00000000 R15 =00000000 > R16 =00000000 R17 =00000000 R18 =00000000 R19 =00000000 > R20 =00000000 R21 =00000000 R22 =00000000 R23 =00000000 > R24 =00000000 R25 =00000000 R26 =00000000 R27 =00000000 > R28 =00000000 R29 =00000000 R30 =00000000 R31 =00000000 > SPR0 =00000000 SPR1 =00000000 SPR8 =00000000 SPR9 =00000000 > 001F0000 00040000 WORD $00040000 > > The board don't have any disk or system for the moment, perhaps this is the > problem ? > I just want to try to boot now... Because I have also a mvme2303 with a > whole debian > system on it. So if I have a kernel for the mvme5100 I will only need to > put my > SCSI PMC to have a complete system. > > O+ xavier -- Brian Waite Looking for a TeraFLOP in a closet www.fastcluster.com ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/