Date: Mon, 1 Oct 2001 16:05:15 -0400 Message-ID: <20011001160514.A3450@ghettohack.net> Mime-Version: 1.0 Content-Disposition: inline From: Tim Ball Subject: [linux-lvm] can't get initrd to work Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-lvm@sistina.com I'm trying to migrate a fresh debian install over to lvm+xfs. I previously had built a 2.4.10 kernel w/ support for both xfs and lvm that allows me to boot and read my lg stuff. The kernel is from the xfs cvs tree.. Following the steps of the howto I've made an initrd using lvmcreate_initrd. Then I added the proper lines to /etc/lilo.conf. When I try to boot my "lvm" kernel I get two errors and then a kernel panic complaining that it cannot open the root device, the following is what I've retyped of the relievent info. --snip--snip--snip-- VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev lvmiopversion -- Exec of vgscan failed lvmiopversion: No such file or directory lvmiopversion -- Exec of vgchange failed lvmiopversion: No such file or directory VFS: Cannot open root device "3a00" or 3a:00 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 3a:00 --snip--snip--snip-- Now when I boot into my old root partition everything works and vgscan and vgchange all do the proper thing... any hints or suggestions? --timball