From: Benjamin Herrenschmidt To: Bryce McKinlay , Subject: Re: benh's kernel is unable to compile. Date: Tue, 30 Oct 2001 10:17:24 +0100 Message-Id: <20011030091724.4260@smtp.adsl.oleane.com> In-Reply-To: <3BDE0FEB.1050206@waitaki.otago.ac.nz> References: <3BDE0FEB.1050206@waitaki.otago.ac.nz> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: >FYI I built 2.4.14-pre2-ben0 out of rsync about 2 hours ago and it seems >to be working. It does get some IDE errors about lost IRQs during bootup >that didn't happen with 2.4.13-ben0. Eventually it said "ide0: reset" >and now appears to be working normally. This is on a Powebook G4. That's absolutely not normal. Can you send me a dmesg log of this situation ? The ide:reset will have disabled DMA, thus causing your to be very slow. If you re-enable DMA later one (hdparm -d1 /dev/hda), to you again get lost IRQs & ide reset or does it stick ? Ben. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/