From: Paul Davis Subject: Re: latency timer Date: Tue, 26 Feb 2002 18:18:54 -0500 Message-ID: <200202262319.SAA08267@renoir.op.net> In-reply-to: Your message of "Wed, 27 Feb 2002 00:01:42 +0100." <000d01c1bf19$96361960$0300a8c0@wgilmenau> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Robert Br ckmann Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org >if I set the latency timer to 0x30, I am able to stream 48 channels of data >to a speed-optimized raid system. However this is not the point. The arecord i would also mention that you may have potential problems doing this with word-clock synced interfaces. its likely that they will generate interrupts sufficiently close in time that you could be severely stressing the full compliance of the PCI interrupt detect/CPU notify system. basically, each card is going to reach the interrupt point at almost exactly the same time, and this could cause problems even though it theoretically should not (the APIC should buffer the 2nd interrupt while the first is processed). i would be very suprised if even RME have tried this experiment: I don't think ASIO has any way to link two physical devices together in the way that ALSA permits. i may be wrong about that. --p _______________________________________________ Alsa-devel mailing list Alsa-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-devel