Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 11 Mar 2002 03:35:26 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 11 Mar 2002 03:35:17 -0500 Received: from mail.pha.ha-vel.cz ([195.39.72.3]:55562 "HELO mail.pha.ha-vel.cz") by vger.kernel.org with SMTP id ; Mon, 11 Mar 2002 03:35:04 -0500 Date: Mon, 11 Mar 2002 09:07:00 +0100 From: Vojtech Pavlik To: Martin Dalecki , Linus Torvalds , LKML Subject: [patch] Minor fix for the via82cxxx.c IDE driver. Message-ID: <20020311090700.A19182@ucw.cz> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="k+w/mQv8wyuph6w0" Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --k+w/mQv8wyuph6w0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi! The attached patch fixes a case where the user enters a bad value for the system bus clock. The 3.33 version will use a nonsensical value instead of the bad value given by user. Patch against 2.5.6, please apply. Thanks. -- Vojtech Pavlik SuSE Labs --k+w/mQv8wyuph6w0 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="via-3.34.diff" diff -urN linux-2.5.5/drivers/ide/via82cxxx.c linux-2.5.5-via/drivers/ide/via82cxxx.c --- linux-2.5.5/drivers/ide/via82cxxx.c Mon Mar 11 08:46:22 2002 +++ linux-2.5.5-via/drivers/ide/via82cxxx.c Mon Mar 11 09:04:17 2002 @@ -1,5 +1,5 @@ /* - * $Id: via82cxxx.c,v 3.33 2001/12/23 22:46:12 vojtech Exp $ + * $Id: via82cxxx.c,v 3.34 2002/02/12 11:26:11 vojtech Exp $ * * Copyright (c) 2000-2001 Vojtech Pavlik * @@ -163,7 +163,7 @@ via_print("----------VIA BusMastering IDE Configuration----------------"); - via_print("Driver Version: 3.33"); + via_print("Driver Version: 3.34"); via_print("South Bridge: VIA %s", via_config->name); pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t); @@ -495,7 +495,7 @@ if (via_clock < 20000 || via_clock > 50000) { printk(KERN_WARNING "VP_IDE: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", via_clock); printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want to assume 80-wire cable.\n"); - via_clock = 33; + via_clock = 33333; } /* --k+w/mQv8wyuph6w0--