From: Paul Davis Subject: Re: HDSP - snd-hdsp.o: init_module: No such device Date: Fri, 17 May 2002 12:46:06 -0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200205171645.g4HGjBT11592@post2.fast.net> References: Return-path: Received: from post2.fast.net (post2.fast.net [209.92.1.22]) by alsa.alsa-project.org (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id SAA22157 for ; Fri, 17 May 2002 18:45:26 +0200 In-Reply-To: Your message of "Fri, 17 May 2002 12:02:56 +0200." Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: thomas@undata.org Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org >Hi, >I was very excited and pleased to see hdsp driver had reached cvs (thank you >Paul !) , so I gave it a try. Here are the results. >I manage to insmod everything needed except the snd-hdsp module. I get the >following in syslog: >May 16 12:11:18 satellite kernel: RME Hammerfall-DSP: no cards found >May 16 12:15:36 satellite kernel: ALSA >../../alsa-kernel/pci/rme9652/hdsp.c:455: Hammerfall-DSP: no Digiface or >Multiface connected! >May 16 12:15:36 satellite kernel: RME Hammerfall-DSP: no cards found > >I'm using a cardbus hdsp + multiface on a toshiba satellite notebook, with >kernel 2.4.18. The computer fails to boot with the card inserted, but accepts >the card afterwards, and the host led on the multiface switches down. > >cat /proc/pci outputs >Bus  3, device   0, function  0: >    Multimedia audio controller: PCI device 10ee:3fc5 (rev 10). >      IRQ 10. >      Master Capable.  Latency=64. >      Non-prefetchable 32 bit memory at 0xd2400000 [0xd20fffff]. >but syslog shows >May 16 09:54:57 satellite kernel: cs: cb_alloc(bus 3): vendor 0x10ee, device >0x3fc5 >May 16 09:54:57 satellite kernel: PCI: Failed to allocate resource >0(d2400000-d20fffff) for 03:00.0 >May 16 09:54:57 satellite kernel: PCI: Enabling device 03:00.0 (0080 -> 0082) >May 16 09:54:57 satellite cardmgr[258]: socket 0: CardBus hotplug device > >Any idea? send the output of lspci -vv please, with and without the PCMCIA interface plugged in. this is not an ALSA issue (yet). it appears that the cardbus/pci bridge code in the kernel may not be working correctly .. --p _______________________________________________________________ Hundreds of nodes, one monster rendering program. Now that’s a super model! Visit http://clustering.foundries.sf.net/