From: drclaw@dogsolitude.org Subject: Re: HDSP -- linux CardBus issue : further information Date: Tue, 4 Jun 2002 10:54:01 -0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20020604145401.GA18517@dogsolitude.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from pylon.dogsolitude.org (postfix@map-dsl-134.map.com [208.168.78.134]) by alsa.alsa-project.org (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id UAA12470 for ; Tue, 4 Jun 2002 20:40:50 +0200 Content-Disposition: inline In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@alsa-project.org Cc: thomas@undata.org, ico@fuse.net List-Id: alsa-devel@alsa-project.org On Wed, May 29, 2002 at 12:23:13PM +0200, Thomas Charbonnel wrote: > Hi Paul, > > Here are some new elements that may help you : > - You said that under windows the bios settings were used to configure the > card, thus asked Ico and I to boot using pci=biosirq, which I did, to find > that the card was given the same IRQ as before (10) (I was supposed to have > an IO problem, not an IRQ one) . Then I checked under windows, and the card > is given 9 as its IRQ, so there may be a problem using the bios settings on > my machine under linux. You might be able to specify IRQ 9 with "cb_pci_irq=9". Of course this depends on support of the IRQ router. There's a ton of useful information over at http://www.tldp.org/HOWTO/PCMCIA-HOWTO-5.html that is worth checking out. 784 - Michael C. Piantedosi - drclaw@dogsolitude.org _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm