Return-Path: To: eddantes@wanadoo.fr Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] [OT] PCI hardware question In-Reply-To: Message from eddantes@wanadoo.fr of "Tue, 25 Jun 2002 16:54:41 +0200." <3D188431.1060804@wanadoo.fr> References: <3D188431.1060804@wanadoo.fr> Date: Tue, 25 Jun 2002 12:25:52 -0600 From: Grant Grundler Message-Id: <20020625182552.B625D4849@dsl2.external.hp.com> Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: eddantes@wanadoo.fr wrote: > I'm planning to buy a second hand station at some point and have fun > with Linux, but in the documentation process, I discovered some stations > have problemw with PCI hardware. > > The question is: which kind of PCI stuff is this? Regular, PC compatible > cards, or HP specific? HP specific PCI Host bus adapter called Dino (aka GSCtoPCI). See hwdb.parisc-linux.org to know which systems used it. Some systems have been fixed with a newer rev of the Dino chip. You can: o update the PDC and install a PCI card o boot parisc-linux o or look for -0004 on the IO board to figure out if the PCI is usable or not. Only HP PCI graphics cards are permitted to be used in PCI when a broken DINO rev is in the system. PDC revs higher than about 5.x will enforce this. Read comments in drivers/gsc/dino.c for more details. grant