From: Peter Heatwole Subject: Re: SPDIF output finally working properly with CS4630 Date: Wed, 24 Jul 2002 16:37:58 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20020724233758.GO1681@porky> References: <3D3DBDA2.10602@cucumelo.org> <20020724013400.GA5214@porky> <3D3E2D08.3070800@cucumelo.org> <20020724181919.GC1681@porky> <3D3EF4CA.1090504@cucumelo.org> <20020724201201.GI1681@porky> <3D3F0710.1060307@cucumelo.org> <20020724212315.GK1681@porky> <3D3F21CD.9090600@cucumelo.org> Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Return-path: Content-Disposition: inline In-Reply-To: <3D3F21CD.9090600@cucumelo.org> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Benny Sjostrand Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On 2002.07.24 14:53 Benny Sjostrand wrote: > Well, if you have access to a oscilloscope that can be programed to view > the differential result > of the signals then probably you can proably view the digital data. > But i've never tested to do this, and don't have any access to a > oscilloscope at home ... Neither do I. =) > Then, do you know if your IEC958 is connected to CS4297A or CS4630 ?? > If it is connected to the CS4297A then this patch will not provide any > output on that IEC958 port. Looking at the datasheets and schematics, it looks like the CS4630 uses AC97 codecs to actually process and output it's iec958 frames. I could easily be wrong, but the schematics for the CS4630-CM don't show the circuitry necessary to power and control an iec958 line. It shows a pin, which I assume links to the codec (in my case, a CS4297A). Is there a datasheet that could show me what you mean? [...] > This dump should not be that long! > Did you change anything in the code ? the SCB block > has always a fixed size of 16 Dwords. A new SCB block will > start on 0x0050. No, I haven't changed a thing. > Well, that's what i can interpret from this outputs. > > Everything look basically OK. > Seems like you have loaded the module successfully and have not started > playing yet. Strange. Well, if it _were_ the case that my card is using a CS4297A for digital output, do you think that would cause this? -- Peter Heatwole "Murphy was just a well known pessimist." ------------------------------------------------------- This sf.net email is sponsored by: Jabber - The world's fastest growing real-time communications platform! Don't just IM. Build it in! http://www.jabber.com/osdn/xim