From: Michal Seta Subject: Re: MIDI+USB - back on track Date: Mon, 5 Aug 2002 09:22:58 -0500 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20020805092258.41ae0bfd.mis@creazone.com> References: <3D4E3AB0.563AB976@ladisch.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi all, So, my MIDI-in is working now. I don't know why, I don't know why it didn't work before and I'm not sure it will work the next time I need to reboot or reconnect my MIDI interface. Thanks everyone for suggestions but here's what was happening: My MIDI cables were OK. I don't use any other usb-audio devices. When I was sending MIDI from the synth to the computer the light on the interface was blinking so I assume it was getting into the interface but for some reason not into the computer. I was away for the weekend so I turned off the computer. This morning, when I booted up, loaded the firmaware, loaded the snd-usb-midi stuff it still didn't work. Then, I noticed, my synth (Roland GR-50) was displaying an error message (MIDI buffer overflow) but I haven't seen any lights on the interface. I disconnected the MIDI cables, turned the synth off, reconnected MIDI cables, turned the unit on and voilą. Everything works. Now, I'm not sure if I really want to try to reproduce it. But I think it's unrelated to the drivers (unless some initialization causes some kind of MIDI jam). rawmidi works as expected dd bs=1