From: Mark Rages Subject: Re: ALSA driver architecture documentation? Date: Mon, 19 Aug 2002 14:44:02 -0500 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20020819194402.GA4672@mlug.missouri.edu> References: <20020819213712.A18500@xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20020819213712.A18500@xs4all.nl> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Fred Jan Kraan Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Mon, Aug 19, 2002 at 09:37:12PM +0200, Fred Jan Kraan wrote: > Recently I started to collect some info on how to make a ALSA driver for > the Digigram VXpocket V2. Digigram decided to provide information > this PCMCIA card, on condition that a moderator is the single point of > contact with Digigram. > A driver for the VXpocket should interface with the PCMCIA module and > (most likely) the ALSA package. Info on how to make a PCMCIA driver > easy to find. Description of layers and a well documented dummy driver. > Alas I did not find much info in the ALSA structure. There is lots of > source code and even a dummy driver, but completely uncommented. > What seems to be documented is how to interface with ALSA, not how to > write a ALSA driver. So is there more than "use the source"? :-) > As far as I know, no. If you find any more information, please add it to: http://alsa.opensrc.org/index.php?page=WritingAnAlsaDriver You can subscribe to alsa-devel for a year like I did, and pick up enough information to write a driver that works every second time it's loaded, with xruns when you even *think* about moving the mouse... Mark ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390