From: Orm Finnendahl Subject: [noreply@sourceforge.net: [pcmcia-cs - Multifunction Cards] RE: configuring unsupported sound-card] Date: Wed, 4 Sep 2002 10:03:59 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20020904080358.GB19686@finnendahl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Return-path: Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Paul Davis , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi, This is a message from Dave Hinds concerning autoconfiguring the PCMCIA. I looked for pci_register_driver and grep only found it in the binaries of snd-hdsp. Has the driver been written with the "modern" kernel API, Dave is referring to? -- Orm ----- Forwarded message from noreply@sourceforge.net ----- From: noreply@sourceforge.net To: noreply@sourceforge.net Subject: [pcmcia-cs - Multifunction Cards] RE: configuring unsupported sound-card If the driver uses the "modern" PCI kernel API, with pci_register_driver() etc, then it should work fine for hot plug devices. As I said, for this to work, you need to use the kernel PCMCIA subsystem, and enable CONFIG_HOTPLUG, and get the latest linux-hotplug package. -- Dave ______________________________________________________________________ ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390