From: Chuck Winters Subject: Re: Configuration Spaces Date: Tue, 17 Sep 2002 09:48:00 -0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20020917094800.A3340@atl.lmco.com> References: <20020916110722.A28835@atl.lmco.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: ; from pbd@op.net on Mon, Sep 16, 2002 at 02:33:09PM -0400 Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Thanks. One other question. This may be stupid, but here goes. My knowledge of signals is that the period is the time it takes a signal to complete 1 cycle. So what is the snd_pcm_hw_params_set_period used for? Is the "period" a property of the signal, or an arbitrary property set by the programmer for performance, fidelity, etc. Thanks, Chuck On Mon, Sep 16, 2002 at 02:33:09PM -0400, Paul Davis wrote: > > 1) Is the configuration space specific to each device, or each opened s > >tream? > > each open stream. obviously, its related to the underlying physical > device, but you're semantically operation on one stream. > > --p > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-devel ------------------------------------------------------- Sponsored by: AMD - Your access to the experts on Hammer Technology! Open Source & Linux Developers, register now for the AMD Developer Symposium. Code: EX8664 http://www.developwithamd.com/developerlab