From: =?iso-8859-1?q?karsten=20wiese?= Subject: help needed on how to autoload snd-usb-midi Date: Tue, 15 Oct 2002 16:40:56 +0200 (CEST) Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20021015144056.40474.qmail@web12202.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai , Clemens Ladisch Cc: Devel Alsa List-Id: alsa-devel@alsa-project.org Hi, I am in the process of updating the tascam us-428 patch for alsa-current and need some hints: formerly the snd-usb-us428 issued "request_module( "snd-usb-midi");" to load that module. this doesn't work with alsa-current anymore as the snd-usb-audio initialisation, which is triggered, conflicts with the initialisation of snd-usb-us428. thus I deleted that "request_module( "snd-usb-midi");" from snd_usb_us428. I remember from some Mail on this list, that snd-usb-midi would be autoloaded if a users process accesses a mididevice, which has been created by "snd_seq_device_new( ...SNDRV_SEQ_DEV_ID_USBMIDI)". this does not happen here now. what do I miss? for the tests I use the bristolsynth with "./startBristol -alsa -audiodev hw:1 -mididev hw:1" having issued "modprobe snd-usb-midi" before, everythingg works as expected. otherwise "Could not open the MIDI interface. Error opening midi device hw:1, exiting midi thread" TIA, Karsten __________________________________________________________________ Gesendet von Yahoo! Mail - http://mail.yahoo.de Möchten Sie mit einem Gruß antworten? http://grusskarten.yahoo.de ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf