From: Mark Rages Subject: Re: Interesting observation of cs46xx bass issues Date: Sat, 19 Oct 2002 01:12:51 -0500 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20021019061251.GA2693@mlug.missouri.edu> References: <3DB0F3D3.9040204@prism.gatech.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <3DB0F3D3.9040204@prism.gatech.edu> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Weijia Yang Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Sat, Oct 19, 2002 at 01:55:31AM -0400, Weijia Yang wrote: > I was fooling around w/ the mixer with the new cs46xx dsp driver, and I > noticed that if I set the volume of one stereo channel (either left or > right) to the lowest value in Master, the bass magically comes back! > However, this invariably results in only one speaker playing music, but > the subwoofer definitly plays bass now. Muting the volume of only one > channel in PCM also does the same trick. However, bringing both channels > to the same level results in the absence of bass again. Any ideas? This sounds like the effect achieved when one channel is out-of-phase in an analog system. Regards, Mark ------------------------------------------------------- This sf.net email is sponsored by: Access Your PC Securely with GoToMyPC. Try Free Now https://www.gotomypc.com/s/OSND/DD