From: diekema_jon Date: Thu, 6 Feb 2003 10:38:57 -0500 (EST) Subject: [U-Boot-Users] Dynamic SDRAM Config on MPC8245 In-Reply-To: <0000B2F9.C22236@net1plus.com> from "clh@net1plus.com" at Feb 06, 2003 10:21:43 AM Message-ID: <200302061538.KAA10839@lucky.si.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > Has anyone looked at this on 8245 or like processors/SDRAM > controllers? We'd like to hear comments/opinions. We havn't done this for the MPC8245, however we did this for the MPC8260. Perhaps you can use this code or ideas on the MPC8245. This can be found in the U-Boot tree as boards/sacsng/sacsng.c. Look for the initdram() routine. ********************************************************************** This e-mail and any files transmitted with it are confidential and may be legally privileged or otherwise exempt from disclosure under applicable law. This e-mail and its files are intended solely for the individual or entity to whom they are addressed and their content is the property of Smiths Aerospace. If you are not the intended recipient, please do not read, copy, use or disclose this communication. If you have received this e-mail in error please notify the e-mail administrator at postmaster at si.com and then delete this e-mail, its files and any copies. This footnote also confirms that this e-mail message has been scanned for the presence of known computer viruses. ***********************************************************************